Reviewing model data

The Review Sales History window in Inventory Services displays a daily history of readings, orders, sales, and deliveries for up to 10 tanks (commodities) at a store.

The Review Sales History window consists of a header, and individual tabs for:

  • Daily tank readings

  • A graphic representation of readings plus deliveries for each tank

  • Sales

  • Orders numbers

  • Sales trend summaries, per commodity

  • Activity log, per commodity

In the Readings tab, you can change the information in the ReadingDate and Reading fields. All other fields in the tabs are read-only.

image2

Retrieving a store’s sales history

During a holiday or special event, a gas station may sell greater or lesser amounts of fuel. Inventory Services stores all historical sales data. You can use this data to generate sales reports. This information will help dispatchers anticipate consumption patterns and identify sales trends. It will also allow them to reduce retains and runouts due to date or event-related forecasting issues.

Use fields in the Review Sales History window’s header section to enter a store ID, start date, and end date for the sales history data you want to retrieve.

image3

These fields in the window header are used to retrieve data:

Company

Enter the store’s primary ID, as recorded in its profile.

Note: Alternatively, you can use the Alt ID field to specify the store for which you are retrieving sales history.

Alt ID

Enter the store’s alternate ID of the store.

Note: An alternate ID can be recorded for a company in its profile.

Start

Enter the start date for the report period displayed in the Review Sales History window.

Notes:

  1. By default, the report period’s start date extends back the number of weeks recorded for the commodity in the Commodity Forecast Setup window’s Weeks Included field.

  2. The selected date applies to all tabs in the Review Sales History window.

Lock Start Date

After you set the Start date, select the checkbox to retain that date as the default start date. The Start date will be read only until you clear the checkbox.

End

Enter the ending date for the report period displayed in the Review Sales History window. The field value defaults to the current date, but you can enter a different date, if needed.

Notes:

  1. To ensure that only completed orders are displayed, the actual end date for displayed data defaults to four days before the End field value. For example, if the date entered in the field is 3/12/2012, only orders completed by 3/8/2012 will be retrieved.

  2. The selected date applies to all tabs in the Review Sales History window.

Use Current Time

Select the checkbox to use the current time for the Start and End fields. The specified date/time range appears to the right of the field.

image4

The remaining fields are read-only. The system provides information based on the store ID you entered.

Name

Name of the store

Address1

Store’s street address

City

Store’s city/state location

Phone

Store’s phone number

Comments

Value from the CmpMisc1 field in the store’s profile

To open the Review Sales History window:

  1. Go to Maintenance > Review Sales History.

  2. The End field defaults to four days earlier than the current date. To work with a different end date, change the date.

  3. Enter the appropriate ID in the Company or Alt ID field, and press TAB.

  4. Select the needed history tab.

If a note or an alert has been recorded for the store, the Note indicator background color changes from gray greynote to yellow yellownote or red rednote. Click the indicator to view notes recorded in the company profile’s Notes Order # window. Notes accessed in this window are read-only.

Understanding readings data

The Readings tab displays a grid of daily readings, orders, sales, and delivery data for up to 10 tanks at a store. Each day is represented by a row. Each tank’s data is represented by a column.

Each row displays the following information for a given day:

  • Reading date, time, and weekday

  • Hours since the previous reading(s)

  • The order numbers of the orders to be delivered

  • Total volumes of deliveries and sales

  • Readings, sales, and deliveries, per tank

image8

Field definitions

All fields are read-only.

ReadingDate

Date and time of a group of tank readings

Day

Weekday on which the tanks were read

Hours

Number of hours between a set of tank readings and the previous set of tank readings (the earlier adjacent row)

TotalSales

Sum of the sales columns (Sales1 + Sales2 …​ Sales10) for a given date and time

Note: By default, this field is hidden. Use the Field Chooser to make it visible.

TotalReadings

Sum of the reading columns (Reading1 + Reading2 …​ Reading10) for a given date and time

Note: By default, this field is hidden. Use the Field Chooser to make it visible.

DeliveryOrders

Order numbers scheduled to be delivered on the ReadingDate

Note: If there are multiple order numbers, they are separated by commas.

TotalDeliveries

Sum of the delivery columns (Delivery1 + Delivery2 …​ Delivery10) for a given date and time

Reading1-Reading10

Readings for tanks 1-10 for a given day and time

Sales1-Sales10

Amount of product pumped from a tank (1-10) for a given date and time

Delivery1-Delivery10

Deliveries for tanks 1-10 for a given date and time

  1. By default, the Readings grid displays columns for five tanks.

  2. In each row, DeliveryOrders and TotalDeliveries are grouped as stacked fields. The TotalSales field belongs to this group, but is hidden by default.

  3. Reading, Sales, and Delivery fields are grouped at the top of each tank’s column.

  4. You can add or remove fields and columns with the Field Chooser.

    Use care to maintain the proper grouping of tank fields in each column. Contact your Support team for assistance.

Viewing the readings and deliveries graph

The Readings Graph tab displays readings and delivery amounts, per day, for up to 10 tanks at a store. All fields are read-only.

A graph for Tank 1 is displayed by default. Use the radio buttons at the top of the graph to select Tank 2- Tank 10 as needed.

image9

A bar can represent a delivery amount and a reading amount. Delivery amounts are shown as a green bar segment. Reading values are shown as a blue segment. It is possible for a bar to consist of only one segment.

  • The graph’s vertical (Y) axis displays the total volume (delivery + reading) of product in the tank.

  • The graph’s horizontal (X) axis shows the date and time corresponding to each bar.

  • If there are multiple readings and/or deliveries for a tank on a given day, there are multiple bars side by side for that day.

  • Placing the cursor over a graph segment displays the volume, date, and time of the reading or delivery.

    Show me

    image10

Understanding sales data

The Sales tab displays product sales for each tank as of the displayed day and time. Product sales are quantities pumped from a tank.

image11

All fields are read-only.

WeekDay

Weekday (Sunday-Saturday) corresponding to the date shown in the Day column

Day

Date and time corresponding to the sales made from each tank (Sales1-Sales10)

Sales1 - Sales10

Volume of each commodity (tanks 1-10) sold by the store on a given date, as of the displayed date and time

Understanding orders data

The Orders tab displays product quantities delivered to a tank on a given date and time. If multiple orders exist for a given day, each order number is shown in a separate row.

image12

All fields are read-only.

OrderNumber

Order ID number

DeliveryDate

Order’s scheduled delivery date

AdjustedDeliveryDate

Date the Forecaster projects or has recorded as the actual delivery date

Volume1-Volume10

Delivered volume of a particular commodity on the order

TotalVolume

Sum of all commodities (Volume1 + Volume2 + …​ Volume10) delivered on a given delivery date

Note: By default, the TotalVolume column is located at the right of the grid.

Understanding the data summary

The Summary tab compares a tank’s total sales for the week before and the week after the date in the End field.

The tab includes a calculation of delta volume and delta percent. You can view additional daily sales figures and trends for a commodity by clicking image13 Expand in its row.

image14

All fields are read-only.

Commodity

Commodity ID

WeeklySalesBefore

Weekly sales before the date displayed in the End field

WeeklySalesAfter

Weekly sales after the date displayed in the End field

Delta

Calculated as:

( WeeklySalesAfter - WeeklySalesBefore )

A negative change appears in red. A positive change appears in green.

Delta Percent

Calculated as:

[(WeeklySalesAfter - WeeklySalesBefore)/WeeklySalesBefore] x 100

Total

Total sales of the commodity for the period ending on the End date

The total is calculated as the sum of sales displayed for Sunday through Saturday.

TotalOld

Sum of volumes for SundayOld through SaturdayOld

SundayPercent - SaturdayPercent

Calculated as:

( Sales for an individual day / Total ) x 100

Sunday - Saturday

Daily sales for each weekday, as of the End date

SundayOld - SaturdayOld

Daily sales according to the product’s current sales model

Understanding the summary graphs

When you expand a tank’s row, it displays daily sales details and graphs for the tank.

Show me

image14b

Individual graphs include:

  • The Forecast Sales Update Rule
    The left graph displays the Forecast Sales Update Rule selected for the tank in the Commodity Forecast Setup window. Rule graphs include:

    • Flat
      All weights are the same. This is the same as taking the average without weighting.

      image15

    • Standard
      Weights are decreased in a uniform fashion (X-1, X-2, X-3…​).

      image16

    • Half Life
      Each week is 50% more important than the next (X/2, (X/2)/2, (X/2)/(X/2)/2, etc.).

      image17

    • Base 10
      Each week is 10 times more important than the next (next (X/10, (X/10)/10, (X/10)/(X/10)/10, etc.).

      image18

  • Total Weekly Sales
    The center graph displays total sales for the weeks before and after the date entered in the End field. The bars correspond to TotalOld and Total.

    Show me

    image19

  • Daily sales trends
    The right graph displays daily sales trends for the weeks before and after the date entered in the End field. The graphs correspond to SundayOld-SaturdayOld and Sunday-Saturday.

    Show me

    image19

Understanding Forecaster log data

The Log tab records the activity of the Forecaster.

image20

All fields are read-only.

Application

Application (Forecaster) that performed the logged activity

Commodity

ID of the commodity that was affected by the logged activity

LogMessage

Summary of the logged activity

For the Forecaster, these changes are daily updates of the sales forecast.

LogDate

Date and time the log entry was recorded

UserID

ID of the user who performed the logged activity