INI settings that are used by Fuel Dispatch

Your TTS50 file contains the global settings that control how TMWSuite operates. You must set up this file for your company’s way of doing business. General information about the INI settings can be found in the TMWSuite System Administration guide.

[Brackets] enclose all the section headings in your TTS50. Each setting must remain in its section. The TTS50 is not alphabetical - you must use your text editor’s Find tool to locate a setting or section.

[Dispatch] settings

[Dispatch]Allow900Exp

Applies to

TMWSuite, Fuel Dispatch, TMW Operations

Description

This setting determines whether expirations with codes of 900 or greater can be edited or completed in the locations listed below.

  • In TMWSuite

    The following locations are affected:

    • In Order Entry, the Expirations window.
      This window allows you to edit expirations; however, you can never add expirations in this window.

    • In Dispatch:

      • Driver/Equipment Status window

      • Driver Availability window
        This window allows you to record and edit expirations for drivers.

      • Expirations window
        This window allows you to edit expirations; however, you can never add expirations in this window.

  • In Fuel Dispatch

    The following locations are affected:

    • The Expirations tab in the resource’s profile

    • The Expiration Edit window

  • In TMW Operations

    The following locations are affected:

    • The Expirations tab in the resource’s profile

    • The Driver/Asset Expirations window

    Note: In TMW Operations, system administrators can always add, delete, or modify all expirations.

Options

  • Y (default)
    Expirations assigned codes of 900 or greater can be modified.

  • N
    Expirations assigned codes of 900 or greater cannot be modified.

    Notes:

    1. In TMWSuite and Fuel Dispatch, both system administrators and non-system administrators are affected. In TMW Operations, only non-system administrators are affected.

    2. This option does not prevent you from adding:

      • Expirations having codes of 900 or greater.

      • Comments in an expiration’s Desc field.

    3. The [Dispatch]OverrideDispExp=Y setting in your TTS50 overrides this option and allows users to add or modify all expirations in Dispatch.

    4. For TMWSuite only, the [Order]OverrideOrdExp=Y setting in your TTS50 overrides this option and allows users to add or modify all expirations in Order Entry.

Additional Notes

Expirations with a code of 900 are used:

  • To terminate drivers, tractors, and trailers.

  • To take equipment out of service for preventative maintenance by the ShopLink add-on module.

[Dispatch]AutoloadDriverPlusCushionWeight

Applies to

Fuel Dispatch 14.40.51, TMW Operations: 15.30.074

Description

In the Trailer Autoload window, the total tare weight is calculated by adding the driver and cushion weight to the tractor tare weight and the trailer tare weight. The total tare weight is added to the commodity weight to create the total gross weight.

Use this setting to specify a typical weight for a driver and cushion. This weight will appear in the Driver + Cushion field in the Order/Permit Information section of the Trailer Autoload window.

Options

  • 250 (Default)
    The default weight for the driver plus cushion is 250 pounds/kilograms.

  • User-specified number
    Specify the number pounds/kilograms for the driver plus cushion.

Additional Notes

Use the [Order]DefaultWgtVolCount setting to specify the default unit of measure for weight, volume, and count used by your company.

[Dispatch]CompartLoadVOlRound

Applies to

Fuel Dispatch 14.40.51, TMW Operations: 15.30.074

Description

In the Trailer Autoload window, you enter the commodity volume for each trailer compartment. Use this setting to identify the default percentage used to round the volume for each compartment.

Options

  • Blank, that is, no entry
    Compartment volumes are not rounded.

  • User-specified percentage

    Enter the number of percentage points each compartment volume should be rounded. For example, enter 1 to round each volume up or down to the next whole number.

    Note: Your entry is the Round To field’s default value. The value can be changed in the Trailer Autoload window on an order-by-order basis.

Additional Notes

This setting is used only for the Auto-fill Autoloading method in Fuel Dispatch and the Autoloading feature in TMW Operations. It is not used for the Learned Autoloading method in Fuel Dispatch.

[Dispatch]FutureAssetExpirationProcessing

Applies to

TMWSuite,V.2004; Fuel Dispatch

Description

When you are assigning resources to a future trip and a resource has a future Priority 1 expiration that will conflict with that trip, this setting determines what the system will do.

Options

  • 1 (default)
    Do not allow the asset assignment to be saved. Display an error message.

  • 2
    Display a warning message. Allow the asset assignment to be saved.

  • 3
    Allow the asset assignment to be saved without displaying any message.

Additional Notes

  1. This setting is applicable in Dispatch (Trip Folder, Planning Worksheet, and Dispatch Advantage), Order Entry, and the Fuel Dispatch module.

  2. The Fuel Dispatch module is a licensed add-on that is sold separately from TMWSuite. For more information, contact TMW Sales.

[Dispatch]MaxOverload%Allowed

Applies to

Fuel Dispatch 14.40.51, TMW Operations: 15.30.074

Description

In the Compartments section of the Trailer Autoload window, you enter the volume and commodity for each trailer compartment. When you click the Autoload button, the system may increase or decrease the volume in each compartment to maximize the load and enhance weight distribution.

Use this setting to specify the maximum increase in volume allowed for each compartment in the Trailer Autoload window.

Options

  • Blank, that is, no entry
    The compartment volumes will not be adjusted up.

  • User-specified percentage
    Specify the maximum allowable percentage increase in volume.

    Note: Enter a positive number (1, 5, etc.).

Additional Notes

  1. Use the [Dispatch]MinOverload%Allowed setting to set the maximum allowable percentage decrease in volume for each compartment.

  2. This setting is used only for the Auto-fill Autoloading method in Fuel Dispatch and the Autoloading feature in TMW Operations. It is not used for the Learned Autoloading method in Fuel Dispatch.

[Dispatch]MinOverload%Allowed

Applies to

Fuel Dispatch 14.40.51, TMW Operations: 15.30.074

Description

In the Compartments section of the Trailer Autoload window, you enter the volume and commodity for each trailer compartment. When you click the Autoload button, the system may increase or decrease the volume in each compartment to maximize the load and enhance weight distribution.

Use this setting to specify the maximum decrease in volume allowed for each compartment in the Trailer Autoload window.

Options

  • Blank, that is, no entry
    Compartment volumes will not be adjusted down.

  • User-specified percentage
    Specify the maximum allowable percentage decrease in volume.

    Note: Enter a negative number (-1, -5, etc.).

Additional Notes

  1. Use the [Dispatch]MaxOverload%Allowed setting to set the maximum allowable percentage increase in volume for each compartment.

  2. This setting is used only for the Auto-fill Autoloading method in Fuel Dispatch and the Autoloading feature in TMW Operations. It is not used for the Learned Autoloading method in Fuel Dispatch.

[Dispatch]OverrideDispExp

Applies to

TMWSuite; Fuel Dispatch; TMW Operations

Description

There are two types of expirations:

  • Non-Dispatch
    The expiration has a label file code that is 199 or less.

  • Dispatch
    The expiration has a label file code that is 200 or greater.

This setting determines if users can add or edit both dispatch and non-dispatch expirations in the locations listed below.

In TMWSuite Dispatch, the following locations are affected:

  • Driver/Equipment Status window

  • Driver Availability window
    Available only in Dispatch, this window allows you to record and edit expirations for drivers.

  • Expirations window
    This window allows you to edit expirations; however, you can never add expirations in this window.

In Fuel Dispatch, the following locations are affected:

  • The Expirations tab in the resource’s profile

  • The Expiration Edit window

In TMW Operations, the following locations are affected:

  • The Expirations tab in the resource’s profile

  • The Driver/Asset Expirations window

Note: In TMW Operations, system administrators can always add, delete, or modify all expirations.

Options

  • N (default)
    Users can modify only dispatch type expirations.

    Notes:

    1. In TMWSuite and Fuel Dispatch, both system administrators and non-system administrators are affected. In TMW Operations, only non-system administrators are affected.

    2. If you also have [Dispatch]Allow900Exp=N in your TTS50, expirations with codes of 900 or greater can be modified only in these locations:

      • In TMWSuite’s File Maintenance application.

      • In Fuel Dispatch’s Expiration Edit window and on the Expiration tab in the resource’s profile.

  • Y
    Users can modify all expirations.

    Note: This option overrides [Dispatch]Allow900Exp=N in your TTS50, allowing Dispatch users to modify expirations with codes of 900 or greater.

Additional Notes

Expiration codes are created in the label file in the System Administration application:

  • For drivers
    DrvExp and DrvStatus

  • For tractors
    TrcExp and TrcStatus

  • For trailers
    TrlExp and TrlStatus

  • For carriers
    CarExp and CarStatus

[Dispatch]skipappclosequery

Applies to

TMWSuite V.2003 and later, Fuel Dispatch, Inventory Services, TMW eManifest, TMW Operations, TMW Back Office

Description

This setting determines whether, when users close an application, the system will display a message asking them to confirm their intent to exit.

Options

  • No (default)
    Display the confirmation message.

  • Yes
    Do not display the confirmation message.

Additional Notes

CRM Right does not support this setting.

[FileMaint] settings

[FileMaint]CompanyShowSupplier

Applies to

Fuel Dispatch; Inventory Services

Description

This setting determines whether the system will display the Supplier check box in the Switches section of the Company File Maintenance window. Companies flagged as suppliers are required on orders created in the Fuel Dispatch Call On Demand Order Entry screen.

Options

  • N (default)
    The Supplier check box is not displayed.

  • Y
    The Supplier check box is displayed.

[FileMaint]ShowCompanyStopOffSettings

Applies to

TMWSuite: 2009.08_08.0700, Fuel Dispatch

Description

This setting determines whether the Billing Stop Event Override and Settlement Stop Event Override sections are visible in the Additional Details sub window, found in the Company File Maintenance window. These sections contain the fields that allow you to enter Bill To-specific:

  • Billable stop events.

  • Number of free stops for Invoicing.

  • Payable stop events.

  • Number of free stops for Settlements.

Your entries in these fields act as overrides to these INI settings:

  • In the [Invoice] section, the StopOffEvents and FreeStopOffsPerOrder settings.

  • In the [Settlement] section, the StopOffPayEvents and StopOffPayFreeStops settings.

Options

  • N (default)
    Hides the Billing Stop Event Override and Settlement Stop Event Override sections.

  • Y
    Displays the Billing Stop Event Override and Settlement Stop Event Override sections.

    Note: When you use this option, if any fields in the Billing Stop Event Override or the Settlement Stop Event Override sections are left blank, the INI setting correlating to that field will be applied. For example, if you do not enter Invoicing event types, the system will use the StopOffEvents setting in the [Invoice] section to identify the event types.

[FuelDispatch] settings

[FuelDispatch]AdditionalOnDutyStatus

Applies to

Fuel Dispatch; TMW Operations

Description

By default, when retrieving available resources in the Card Planner or the Planning Worksheet, the options are On Duty, Off Duty, and All. These options refer to the Shift Status assigned to the resources.

  • On Duty = those resources assigned a ShiftStatus of ON.

  • Off Duty = those resources assigned a ShiftStatus of OFF.

Use this INI setting to include additional ShiftStatus label entries that you want to be flagged as On Duty, such as On Call.

Options

  • Blank, that is, no entry (default)
    The only Shift Status that will be included when selecting On Duty is ON.

  • Additional settings
    Any additional statuses that you might have in the label file, which are not included in this INI setting, are treated as Off Duty. To separate multiple label abbreviations, use commas. Do not use spaces.

[FuelDispatch]AlertNoLoginStatus

Applies to

Fuel Dispatch

Description

This setting determines whether the Log box in the Card Planner’s Driver Shift pane will change color if login has not occurred in an acceptable timeframe before the start of a shift.

Options

  • Y (default)
    Change the color of the Log box based on login time.

  • N
    Never change the color of the Log box.

Additional Notes

The timing of the change in color is determined by the [FuelDispatch]PriorWarnLoginMinutes and [FuelDispatch]PriorAlertloginMinutes settings in your TTS50.

[FuelDispatch]AllowCanceledToAvailable

Applies to

Fuel Dispatch

Description

This setting determines whether an order status can be reset from Cancelled (CAN) or Cancelled Billable (ICO) to Available (AVL) in the Call On Demand Order Entry window.

Options

  • N (default)
    Do not allow an order having a Cancelled or Cancelled Billable status to be reset to Available.

  • Y
    Allow an order having a Cancelled or Cancelled Billable status to be reset to Available.

    Note: To reset an order’s status, you must select Dispatch > Undo Cancel. You cannot select Available in the Status field.

Additional Notes

TMWSuite and TMW Operations do not support this setting.

[FuelDispatch]AllowDriverScheduleEditWithoutAffectingOtherDates

Applies to

Fuel Dispatch 2018.4 and later

Description

In the Edit Driver Schedule window, if you change the Start Company for a day, the End Company for the previous day is changed.

For drivers that float between multiple start companies, use this INI setting to change the Start Company for the current day without affecting the previous day.

Options

  • N (default)
    If you change the Start Company for a day, the End Company for the previous day is changed.

  • Y
    If you change the Start Company for a day, the End Company for the same day changes to the new company. The assigned tractor and trailer reset to UNKNOWN for the same day because you cannot beam tractors and trailers.

[FuelDispatch]AllowEditJOBOrdered

Applies to

Fuel Dispatch 2019.2 and later

Description

This setting determines whether you can edit the Job Ordered or Volume Ordered field after you create and save a job order. These fields appear in Call On Demand Order Entry’s Additional Order Header Information window.

Options

  • N (default)
    Do not allow changes to the value in the Job Ordered or Volume Ordered field for a job order.

  • Y
    Allow changes to the value in the Job Ordered or Volume Ordered field for a job order.

[FuelDispatch]AllowEditShiftLogout

Applies to

Fuel Dispatch, TMW Operations

Description

This setting controls whether a driver’s shift logout time can be edited. By default, the system does not allow log times to be changed. Use this setting to allow a system administrator to change the entry after the logout has been recorded.

Options

  • N (default)
    No one can change a driver’s shift logout time after it is recorded.

    Note: If a change is required, you must contact your TMW Support Representative for assistance.

  • Y
    Only a system administrator can change a driver’s shift logout time after it is recorded.

[FuelDispatch]AllowEstimatedTimeEdits

Applies to

FuelDispatch

Description

This setting provides the following functionality in the Deadhead/Trip editor:

  • Displays the Est. Arrive/Depart Date column in the trip grid.

  • Allows the dates in the Est. Arrive/Depart Date column to be modified.

  • Displays the Reset Est Times button in the window header. This button resets the dates and times in the Est. Arrive/Depart Date column to null values (01/01/00 00:00).

Options

  • N (default)
    Disables the ability to view and edit the Est. Arrival/Depart Date column in the Deadhead/Trip Editor.

  • Y
    Enables the ability to view and edit the Est. Arrival/Depart Date column in the Deadhead/Trip Editor.

Additional Notes

  1. The Deadhead/Trip Editor is feature is a corrective tool reserved for use by an administrator user. It should not be used by dispatch, order entry, or others involved in routine logging and managing of orders.

  2. Typically, the Est. Arrive/Depart Date column is populated through direct data entry, or by external software such as mobile communication or other customer-supplied applications. Otherwise, the dates and times in this column default to 01/01/00 00:00.

[FuelDispatch]AllowInlinePlanningWorksheetChanges

Applies to

Fuel Dispatch

Description

In the Planning Worksheet Assignment Plan pane, an assigned trip can be expanded to show the trip detail. Information, such as commodity and start time, shown in this detail can be changed without opening the order in Call On Demand Order Entry. Users cannot add stops through the Planning Worksheet.

This setting determines whether users can change the information displayed in an order assigned to a resource.

Options

  • N (default)
    Users cannot change the information displayed in the Planning Worksheet Assignment Plan pane detail.

  • Y
    Users can change the information displayed in the Planning Worksheet Assignment Plan pane detail.

[FuelDispatch]AllowOrderScrollCheckAllStops

Applies to

CRM Right, Fuel Dispatch, Inventory Services, TMW eManifest, TMW Operations

Description

By default, if you use the Company tab of the Order Scroll window to search for a shipper or consignee, the search returns only the first and last stops for orders found.

Use this setting to add a check box on the window if you want users to be able to include all stops for orders with a particular shipper or consignee.

Options

  • N (default)
    Hides the Check All Stops check box from the Order Scroll window.

  • Y
    Displays the Check All Stops check box from the Order Scroll window.

[FuelDispatch]AllowRevTypeChangesUntilOrderStarted

Applies to

Fuel Dispatch

Description

Orders are created in the Fuel Dispatch Call On Demand Order Entry application. By default, the RevTypes on an order can be changed only when the status of the order is Available; once the order’s status is Planned, the RevTypes cannot be changed.

The AllowRevTypeChangesUntilOrderStarted setting controls the dispatch status at which the RevTypes1 - 4 fields can no longer be edited in Call On Demand Order Entry.

Options

  • N (default)
    Allow the RevTypes1 - 4 fields to be edited only when a trip’s status is Available.

  • Y
    Allow the RevTypes1 - 4 fields to be edited until a trip’s status becomes Started.

[FuelDispatch]AllowStartedTripsToBeReplanned

Applies to

Fuel Dispatch, TMW Operations

Description

You can plan or re-plan a trip in the Fuel Dispatch Card Planner or Planning Worksheet, and the TMW Operations Trip Planner or Planning Worksheet.

The AllowStartedTripsToBeReplanned setting specifies whether re-planning is permitted until the trip’s dispatch status is Completed, or only until the status is Started.

Options

  • Y (default)
    Allow a trip to be re-planned until the trip’s status is Completed.

  • N
    Allow a trip to be re-planned only until the trip’s status is Started.

[FuelDispatch]AutoAssignDefaultCarrier

Applies to

Fuel Dispatch; Inventory Services

Description

This setting is used by fuel distributors who sell fuel, but do not bill for transportation. It determines if a store’s default carrier is assigned to its forecasted orders automatically. The assignment sets the order status to Planned. Default carriers are assigned to stores in Fuel Dispatch and Inventory Services.

  • Fuel Dispatch
    On the Company Relations Profile window’s Carriers tab

  • Inventory Services
    On the Company Tank Setup window’s Carriers tab

Options

  • N (default)
    Do not automatically assign a carrier.

  • Y
    Automatically assign the store’s default carrier.

    When you use this option, additional processing is available. You can set up the system to set the order status to Completed and set its invoice status to Not Ready. To do this, you must also:

    • Select the Release Only check box for the store. The check box is found in the Company Tank Setup window. You access the window in Inventory Services.

    • Have the [FuelDispatch]AutoCompleteReleaseOnly=Y in your TTS50.

Additional Notes

Fuel Dispatch and Inventory Services are modules in the FuelTMS suite of applications. For more information, contact TMW Sales.

[FuelDispatch]AutoCollapseCardPlanner

Applies to

Fuel Dispatch

Description

By default, the Assignment Plan pane of the Card Planner behaves in such a way that when you remove a planned trip from a driver, any trips after the removed trip on the grid slide to the left, filling in the gap. Use this INI setting to change this behavior.

Options

  • Y (default)
    Always collapse the trips on the Assignment Plan pane, whether the driver is logged in or not.

  • N
    Collapse the trips when the driver is logged in, so that no gaps are left in the driver’s trips for the day. Do not collapse the trips when the driver is logged out, so trips can continue to be planned (or un-planned) for the day.

  • D
    Never collapse the trips on the Assignment Plan pane, whether the driver is logged in or not.

[FuelDispatch]AutoCompleteReleaseOnly

Applies to

Fuel Dispatch; Inventory Services; Forecaster

Description

Used by fuel distributors who are selling fuel but not billing for transportation, this setting determines if the system will automatically set the forecasted order status to Completed, and the invoice status to Not Ready, when both these conditions are met:

  • The order is assigned a carrier

  • The Release Only check box, on the Company Tank Setup window, is selected for the store.

Options

  • N (default)
    Do not automatically set the forecasted order status to Completed, and the invoice status to Not Ready.

  • Y
    Automatically set the order status to Completed, and the invoice status to Not Ready, when the order is assigned a carrier and the Release Only check box is selected for the store.

Additional Notes

Fuel Dispatch, Inventory Services, and the Forecaster are modules in TMW’s Fuel TMS suite of applications. For more information, contact TMW Sales.

[FuelDispatch]AutoloadCompartmentsLoadedValidityCheck

Applies to

Fuel Dispatch: 16.10.17.0

Description

This setting determines whether the system requires each compartment in the Compartments section of the Trailer Autoload window to be loaded.

Options

  • N (default)
    The system does not require each trailer compartment to be loaded.

    If a compartment in the Compartments section of the window is empty, you can save your entries in the Trailer Autoload window.

  • Y
    The volume for each commodity on an order must be loaded in the Compartments section of the Trailer Autoload window.

    If a commodity has not been loaded and you attempt to save your entries in the window, a message identifies which commodity is missing. You cannot save until the specified commodity has been loaded into the Compartments section of the window.

  • W
    If a commodity has not been loaded and you attempt to save your entries in the window, a message warns you that the commodity has not been loaded.

    You can save your entries without loading the specified commodity, or return to the window to load the missing commodity.

[FuelDispatch]AutoloadMethod

Applies to

Fuel Dispatch, TMW Operations: 15.30.074

Description

The Trailer Autoloading feature helps dispatchers load trailers to maximum capacities. Trailer autoloading takes place in the Trailer Autoload window.

Use this setting to specify how the system fills trailer compartments with commodities.

Notes:

  1. This setting applies only when you have the [FuelDispatch]DisplayAutoload=Y setting in your TTS50.

  2. For all autoloading methods, you can manually enter commodities and volumes in the Compartments section of the Trailer Autoload window.

Options

  • 1 (default)
    Commodities are not loaded automatically. The commodity and volume for each compartment must be entered manually.

    Note: Use this option with the Learned Autoloading method in Fuel Dispatch. It is not applicable to the Auto-fill Autoloading method in Fuel Dispatch or the Autoloading feature in TMW Operations.

  • 2
    When the load has a single commodity, the system loads the maximum weight in each compartment. It loads the trailer compartments from front-to-back.

    The total commodity weight cannot be more than the maximum commodity weight allowed for the GVW. If it is, the system decreases the volume in the last compartment so that the total commodity weight is less than or equal to the maximum weight.

    Notes:

    1. Use this option with the Auto-fill Autoloading method in Fuel Dispatch and the Autoloading feature in TMW Operations. It is not applicable to the Learned Autoloading method in Fuel Dispatch.

    2. When you have more than one commodity on the load, you must enter the commodity and volume for each compartment manually.

    3. The loaded volume will be more than or equal to the ordered volume. This helps maximize loads by indicating how much more a load can carry.

  • 3
    When a load has a single commodity, the system loads it in the trailer compartments equally. It fills each compartment to the same percentage of its maximum weight. For example, if a trailer has three compartments, each might be loaded to 79% of its capacity. It loads the compartments from front to back.

    The total commodity weight for all compartments cannot be more than the maximum commodity weight allowed for the GVW. If it is, the system decreases the volume in the last compartment so that the total commodity weight is less than or equal to the maximum weight.

    Notes:

    1. Use this option with the Auto-fill Autoloading method in Fuel Dispatch and the Autoloading feature in TMW Operations. It is not applicable to the Learned Autoloading method in Fuel Dispatch.

    2. If you have more than one commodity on the load, the commodity and volume for each compartment must be entered manually.

    3. The loaded volume will be less than or equal to the ordered volume.

  • 4
    Use this option when loads may have more than one commodity.

    • With one commodity, the system loads the maximum weight in each compartment until the entire commodity has been loaded. It loads the trailer compartments from front-to-back.

    • With multiple commodities, the number of compartments and the capacity of each compartment determine how the system fills them. In some instances, one or more commodities may not be loaded automatically.

    If the total commodity weight is less than the maximum commodity weight allowed for the GVW, the system does not load the last compartment(s) to full capacity.

    If the total commodity weight is more than the maximum commodity weight allowed for the GVW, the system decreases the volume in the last compartment(s) so that the total commodity weight is less than or equal to the maximum weight.

    Notes:

    1. Use this option with the Auto-fill Autoloading method in Fuel Dispatch. It is not applicable to the Learned Autoloading method in Fuel Dispatch, or the Autoloading feature in TMW Operations.

    2. The loaded volume will be less than or equal to the ordered volume.

[FuelDispatch]AutoloadProductLoadedValidityCheck

Applies to

Fuel Dispatch: 16.10.17.0

Description

This setting determines whether the system requires the volume for each commodity on an order to be loaded in the Compartments section of the Trailer Autoload window.

Options

  • N (default)
    The system does not require the volume for each commodity on an order to be loaded.

    If a commodity on the order has not been loaded in the Compartments section of the window, you can save your entries the Trailer Autoload window.

  • Y
    The volume for each commodity on an order must be loaded in the Compartments section of the Trailer Autoload window.

    If a commodity has not been loaded and you attempt to save your entries in the window, a message identifies which commodity is missing. You cannot save until the specified commodity has been loaded into the Compartments section of the window.

  • W
    If a commodity has not been loaded and you attempt to save your entries in the window, a message warns you that the commodity has not been loaded.

    You can save your entries without loading the specified commodity, or return to the window to load the missing commodity.

[FuelDispatch]AutoloadThresholdPercent

Applies to

Fuel Dispatch

Description

When you use trailer autoloading, the volume of a commodity you enter in the Comp Vol field in the Trailer Autoloading window must match the ActualQuantity, QTY, or NetVolume amount entered in Call on Demand Order Entry. The applicable field is identified by the [FuelDispatch]QtysToPromptAutoload setting.

Your company might prefer some leeway in entering volumes, however. For example, you might want to load a reserve, or fill a partial order.

Use this setting to specify a percentage by which a variance is allowed.

Options

  • 0 (default)
    The ordered and loaded volumes of a commodity must match exactly.

  • User-specified percent
    Enter a number between 1 and 100.

    This value sets the maximum permissible difference, in percent, between the total volume of a commodity loaded on a trailer, and the total ordered volume.

    For example, an order might specify commodity volumes of 500, 800, and 1000 gallons, for a total of 2300 gallons. With AutoloadThresholdPercent=10, the total loaded volume could range from 2070 to 2530 gallons.

    Note: When you enter a value between 1 and 100, these requirements must be met before you can save the autoload profile:

    • The total volume of all commodities loaded on the trailer must be within the specified percentage.

    • Each commodity volume must be within +/- 50% of the commodity’s ordered amount. This is a fixed, internal setting in Fuel Dispatch.

Additional Notes

Whether you use the default value (0) or enter a value between 1 and 100, the gross vehicle weight must comply with the Max Gross value in the Order/Permit Information section of the Trailer Autoload window.

[FuelDispatch]AutoloadValidityCheck

Applies to

Fuel Dispatch 14.40.51, TMW Operations: 15.30.074

Description

In the Trailer Autoload window, you can round compartment volumes in the Freight grid. This can cause a mismatch between the ordered volume and loaded volume.

When volumes are rounded, use this setting to ensure that the ordered volume and loaded volume match.

Note: Rounding is based on the Round To field in the Trailer Autoload window. The [Dispatch]CompartLoadVOlRound setting in your TTS50 specifies the default increment.

Options

  • N
    Do not validate compartment volumes.

    No warning will be displayed.

  • Y
    Validate compartment volumes. When a volume mismatch occurs, display a warning and prevent the order from being saved.

    Before the order can be saved, any volumes in the Freight grid must be manually changed to whole numbers.

  • W
    Validate compartment volumes. When a volume mismatch occurs, display a warning, but do not prevent the order from being saved.

    The order can be saved whether or not the volumes with decimal places are changed to whole numbers.

Additional Notes

This setting is used only for the Auto-fill Autoloading method in Fuel Dispatch and the Autoloading feature in TMW Operations. It is not used for the Learned Autoloading method in Fuel Dispatch.

[FuelDispatch]BoardSecurity

Applies to

Fuel Dispatch

Description

In Fuel Dispatch, relationships between a user or group and a terminal or fleet as identified in the label file of System Administration provide a board-level security. This security allows terminal managers, dispatchers, or schedulers to view specific boards with read/write, read only, or no security access to orders for planning or editing in the Card Planner, Planning Worksheet, and Call on Demand Order Entry windows.

By default, using the board-level security functionality is disabled. As systems administrator, you might want to assign your board-level security before you enable it in the system for your users.

Use this INI setting to enable or disable the board-level security functionality.

Options

  • N (default)
    Disable board security.

  • Y
    Enable board security.

[FuelDispatch]BoardSummaryReportPath

Applies to

Fuel Dispatch

Description

This setting:

  • Identifies the template used to generate the Board Summary Report. You can run the report from the Card Planner, Planning Worksheet, and Reports window.

  • Specifies the location of the template.

Note: To generate reports, you must have the TMW Crystal Reports Redistributable installed. See Installing FuelTMS V.2018.2 and later for additional information.

Options

  • c:\Program Files\TMW Systems, Inc\Fuel Dispatch\Reports\FuelDispatchBoardSummary01.rpt (default)
    This entry assumes that the default location was accepted when Fuel Dispatch was installed.

    Note: Do not use this entry if you are using SSRS reports. Consult your TMW Business Intelligence representative for assistance.

  • User-specified report
    Enter the absolute path to the default report template if different from the default. For example:

    C: \Fuel Dispatch\Reports\FuelDispatchBoardSummary01.rpt

  • Blank, that is, no entry
    No report is specified, which results in an error when a user generates a report.

[FuelDispatch]CanOnlyModifyOrderNotes

Applies to

Fuel Dispatch, TMW Back Office, TMW Operations

Description

When you look up a trip, you can view, create, change, and delete all note types, including notes for master file records, such as companies and drivers.

You can use this setting to allow users to view all note types, but not have the ability to create, change, and delete notes that are attached to profiles.

Options

  • N (default)
    Users can create, change, and delete all note types.

  • Y
    Users can view all note types, but they can create, change, and delete trip-related notes only.

    Note: For Fuel Dispatch, this setting affects the Notes window only when you access it via the Notes icon. When the window is accessed from the Notes tab on the Call On Demand Order Entry window, users automatically are limited to additions, changes, and deletions of Order notes in the Order tab.

Additional Notes

CRM Right does not support this setting.

[FuelDispatch]CardPlannerVertSplit

Applies to

Fuel Dispatch, TMW Operations

Description

You can use this setting to change a window layout from horizontal to vertical.

Fuel Dispatch

By default, the sections of the Card Planner are shown in a horizontal layout.

* The Trips/Resources pane is on the top.

* The Shift and Assignment Plan panes are on the bottom.

This setting lets you change the window to a vertical layout.

* The Trips/Resources pane is on the left.

* The Shift and Assignment Plan panes are on the right.

TMW Operations

By default, the sections of the Trip Planner are shown in a horizontal layout.

* The Trips/Resources pane is on the top.

* The Shift and Assignment Plan panes are on the bottom.

This setting lets you change the window to a vertical layout.

* The Trips/Resources pane is on the left.

* The Shift and Assignment Plan panes are on the right.

Options

  • N (default)
    The window layout is horizontal.

  • Y
    The window layout is vertical.

[FuelDispatch]CarryPrimaryTrailerPup

Applies to

Fuel Dispatch

Description

Use this setting to assign a secondary trailer to a driver when the primary trailer is assigned. This functionality is available in the Card Planner and Planning Worksheet.

Note: This setting applies only when the trailers are linked in the primary trailer’s profile. That is, the secondary trailer’s ID is recorded in the Assigned PUP field.

Options

  • N (default)
    Do not assign the linked secondary trailer automatically.

  • Y
    Assign the linked secondary trailer automatically.

[FuelDispatch]CheckProductCompatibility

Applies to

Fuel Dispatch V.15.20.34.0 and later

Description

Use this setting to have the system check whether a trailer’s consecutive trip assignments involve incompatible commodities.

To identify incompatible commodities, you create rules in the Invalid Prior Commodity Maintenance window. Supported rule types include:

  • Commodity class-to-commodity class

  • Commodity-to-commodity

  • Commodity class and commodity to commodity class

  • Commodity class and commodity to commodity

  • Commodity class and commodity-to-commodity class and commodity

Note: This feature does not look at entries on the Prior Commodities tab in a commodity’s profile.

The checking takes place in the Card Planner and Planning Worksheet when you save trip assignments.

Options

  • Y (default)
    Check trip segments for incompatible commodity conflicts.

    Note: When you use this option, the system looks at the [FuelDispatch]EnforcePriorCommodityRules setting to determine whether the violation results in a warning or an error.

  • N
    Do not check trip segments for incompatible commodity conflicts.

[FuelDispatch]CodoeBillToModeConsigneeDropDownCount

Applies to

Fuel Dispatch V. 15.30.22.0 and later

Description

When a Bill To company is linked to many consignees, you can use this setting to limit the initial list of consignees retrieved. Limiting the list reduces data retrieval time. This setting is applicable only:

  • When you are using the Bill To level of company relationship enforcement

  • You are retrieving consignees in the Consignee or Alt ID fields.

Notes:

  1. As a best practice, the [FuelDispatch]SetCodoeInitialFocusConsignee setting should be set to N.

  2. If you are using instant best match, the consignee list will show the first user-specified number of records that meet the criteria for the Bill To company. You can continue to add characters to the field to show the next user-specified number of records that meet those criteria.

  3. If you are not using instant best match, the consignee list will show the user-specified number of all records for the BillTo company.

Options

  • 0 (default)
    The system will retrieve no more than 200 consignees linked to the order’s BillTo company.

  • User-specified number
    Enter a number that is smaller than 200. The system will retrieve no more than that number of consignees linked to the order’s Bill To company.

Additional Notes

TMW Operations does not support this setting.

[FuelDispatch]CodoeDblClkAsTab

Applies to

Fuel Dispatch V.15.040.026 and later

Description

Use this setting to open Call On Demand Order Entry when you double-click on an order in the Card Planner and Planning Worksheet.

First available in Fuel Dispatch 17.60

If you are set up to work with oil field orders, this setting allows you to open Oil Field Order Entry when you double-click on an order in the Card Planner or Planning Worksheet.

Note: To use Oil Field Order Entry, you must have [FuelDispatch]ShowOilFieldOrderEntry=Y in your TTS50 file.

Options

  • N (default)
    When you double-click on an order in the Card Planner or Planning Worksheet:

    • The order details appear in a separate, movable Call On Demand Order Entry window. You must close this window to return to the Card Planner or Planning Worksheet.

    • If you are set up to work with oil field orders, order details appear in a separate, movable Oil Field Order Entry window.

  • Y
    When you double-click on an order in the Card Planner or Planning Worksheet:

    • The Call On Demand Order Entry window opens, displaying the order detail. You can return to the Card Planner or Planning Worksheet without closing Call On Demand Order Entry.

    • If you are set up to work with oil field orders, order details appear in the Oil Field Order Entry window.

    Note: If you need to check details of multiple orders, you can leave Call On Demand Order Entry or Oil Field Order Entry opened. Each time you double-click on an order in Card Planner or Planning Worksheet, the order entry window refreshes to show details of the new order.

Additional Notes

  1. Whether viewing orders in Call On Demand Order Entry or in the movable window, you can open only one order at a time. The same is true if you are set up to work with oil field orders.

  2. This setting also applies to double-clicking orders in the Forecast Order Review and Forecast Order Site Review windows.

[FuelDispatch]CommoditySubclass

Applies to

Fuel Dispatch; Inventory Services

Description

In File Maintenance, you can use two commodity classes to categorize a commodity. Fuel Dispatch requires that you link each consignee with one or more commodities within one of those commodity classes. When a consignee is recorded for an order, you will be able to select only a commodity class/commodity that has been associated with that consignee.

Use this setting to specify which commodity class Fuel Dispatch is to use.

Options

  • 2 (default)
    Use Commodity Class 2.

  • 1
    Use Commodity Class 1.

[FuelDispatch]CompanyInformationReportPath

Applies to

Fuel Dispatch

Description

This setting:

  • Identifies the template use to generate the Company Information Report. You can run the report from the Card Planner, Planning Worksheet, and Reports window.

  • Specifies the location of the template.

Note: To generate reports, you must have the TMW Crystal Reports Redistributable installed. See Installing FuelTMS V.2018.2 and later for additional information.

Options

  • Blank, that is, no entry (default)
    No report is specified, which results in an error when a user generates a report.

  • User-specified report
    Enter the absolute path to the default report template. For example:

    C:\TMWSuite\Fuel Dispatch\Reports\cr_FuelMap.rpt

    Note: Do not use this entry if you are using SSRS reports. Consult your TMW Business Intelligence representative for assistance.

[FuelDispatch]DefaultLearnMode

Applies to

Fuel Dispatch

Description

By default, Learning Mode is activated. As you enter orders in Call On Demand Order Entry, the system records the combinations of companies on the orders and saves them as company relationships. Over time, Learning Mode will record every combination of consignee, shipper, supplier, and Account Of companies that you use with a particular Bill To. The system will also learn PIN Codes for linked companies if the PINCODEOVERWRITE INI setting has a value other than 1.

Options

  • Y (default)
    As you save orders in Call On Demand Order Entry, the system will also save company relationships not already in the database.

  • N
    Call On Demand Order Entry will not save new relationships. You must define company relationships and record PIN codes in the Company Profiles - Relations window.

[FuelDispatch]DefaultLoadUnloadDwellTimeMinutes

Applies to

Fuel Dispatch, TMW Operations

Description

For a shipper, dwell time is the amount of time a driver needs to load cargo. For a consignee, dwell time is the amount of time a driver needs to unload.

  • Fuel Dispatch
    You can record a company’s dwell time on the Company Profiles - Relations window. Use this setting to set a default dwell time for shippers and consignees for which dwell time has not been recorded.

    When a company without a dwell time is used as a stop on an order, the system checks the number of minutes recorded for the setting. To auto-calculate the stop’s Departure time, it adds that number to the stop’s Arrival time.

  • TMW Operations
    Use this setting to record a global dwell time for all shippers and consignees. There is no way to set dwell times on a company-by-company basis.

    When recording an Arrival time on an order, the system checks the number of minutes recorded for the setting. Then it auto-calculates the stop’s Departure time, by adding that number to the stop’s Arrival time.

Options

  • 30 (default)
    Default dwell time is 30 minutes.

  • User-defined number of minutes
    Make your entry as a whole number.

    Notes:

    1. In Fuel Dispatch, if you make an entry of 0 (zero) for this setting, and dwell time has not been entered for a company, the system makes the stop’s departure time identical to the arrival time.

    2. In TMW Operations, if you make an entry of 0 (zero) for this setting, the system will check [Operations]DefaultLoadTime in your TTS50 for the dwell time. If both are set to 0 (zero), then the system will set the arrival date/time and departure date/time to be the same.

Additional Notes

To determine total dwell time for a stop in Fuel Dispatch, the system also adds the dwell time for the trailer, as recorded in its trailer profile.

Note: This occurs only if you have [FuelDispatch]UseTrailerDwellTime=Y in your TTS50.

[FuelDispatch]DefaultUserTerminalOnNewOrder

Applies to

Fuel Dispatch

Description

By default, when a user enters a new order in the Call On Demand Order Entry window, the system copies RevType1 - 4 values from the consignee’s profile to the new order. If you use RevType1 to identify your terminals, you can use this setting to have the system copy the terminal value from the user’s profile instead. RevType2 - 4 values will not be copied from either profile.

Options

  • N (default)
    Do not copy the user’s terminal (RevType1) value to the order.

    Note: The system will use the [FuelDispatch]SetRevTypeByConsignee setting in your TTS50 to determine how RevType1 - 4 values should be set on new orders.

  • Y
    Copy the user’s terminal (RevType1) value to the order.

    Notes:

    1. Users' terminal values are recorded in the TMWSuite User Maintenance window.

    2. Using this option overrides the [FuelDispatch]SetRevTypeByConsignee setting in your TTS50. Regardless of the entry for that setting, the system will not copy any of the consignee’s RevType values to the order. Users must enter RevType2 - 3 values manually.

Additional Notes

TMWSuite and TMW Operations do not support this setting.

[FuelDispatch]DisableCODOEShipperChangeValidation

Applies to

Fuel Dispatch: 14.040.033

Description

In Fuel Dispatch, relationships are links between companies that affect the order entry process in Call On Demand Order Entry. You can set up the system to enforce relationships when you enter orders. The highest enforcement level for company relationships is the Bill To option. By default, when you use it, changing an order’s shipper or supplier may also change the commodities on the order. If the new shipper/supplier offers different commodities, the system changes the commodity to one available from the new shipper. Both the commodity code and class are updated.

This setting allows you to disable this relationship enforcement. When you change the shipper or supplier for an order, the system retains the original commodity code and class.

Note: This setting applies to the Freight tab in Call On Demand Order Entry. It does not apply to the Tanks tab.

Options

  • N (default)
    Apply relationship enforcement when changing the shipper or supplier.

    Changing the shipper or supplier may change the commodity code and class, based on the commodities available at the new shipper/supplier.

    • If the new shipper/supplier offers a commodity with the same commodity code and class, no change is made.

    • If the new shipper/supplier offers a different commodity with the same commodity class, only the commodity code is set to the new value.

    • If the new shipper/supplier does not offer a commodity with either the same commodity or commodity class, both are set to UNKNOWN. The user must manually select a commodity class and code.

  • Y
    Disable relationship enforcement when changing the shipper or supplier.

    Changing the shipper or supplier on an order does not change the commodity code or class.

Additional Notes

The relationship enforcement level is set to BillTo when you have [FuelDispatch]OERelationMode=2 in your TTS50.

[FuelDispatch]DispatchDashboardRefreshTime

Applies to

Fuel Dispatch V. 17.10

Description

This setting determines if the Dispatch Dashboard automatically refreshes sales data.

Options

  • 0 (default)
    The dashboard does not refresh automatically.

  • User-specified interval
    Specify in minutes how frequently the dashboard data should be refreshed. Make your entry as a whole number.

    Notes:

    1. Unsaved changes made to readings data will be lost when the board refreshes.

    2. As of V. 17.20, users can override the automatic refresh using the dashboard’s Auto Refresh check box.

      • When the check box is selected, the dashboard data is refreshed automatically, based on the number of minutes specified.

      • When the check box is cleared, the dashboard data is not refreshed automatically.

[FuelDispatch]DisplayAutoload

Applies to

Fuel Dispatch

Description

The Trailer Autoloading feature helps dispatchers:

  • Load trailers to maximum capacities, which increases trailer revenue

  • Avoid fines related to overweight loads and axle overloading.

Use this setting to enable the Trailer Autoloading feature in Fuel Dispatch.

Note: This setting does not apply to the Autoloading feature in TMW Operations.

Options

  • N (default)
    Disable the Trailer Autoloading feature in Fuel Dispatch.

  • Y
    Enable the Trailer Autoloading feature in Fuel Dispatch.

    Note: When this option is used:

    1. The Fuel Dispatch application includes these commands in the Maintenance menu:

      • Trailer Autoload Maintenance

      • Trailer Compartment History

    2. The WeightOfQuantity column appears in the Freight detail grid in the Call On Demand Order Entry window.

[FuelDispatch]DisplayCommodityDensities

Applies to

Fuel Dispatch

Description

This setting determines whether the Commodity Density window is accessible in the Fuel Dispatch application. The window allows you to record density values for all commodities, without opening each commodity’s profile.

The window is accessed by selecting Maintenance > Commodity Densities.

Options

  • N (default)
    Hide the Commodity Densities command.

    Note: When this option is used, you must record a commodity’s density in its profile.

  • Y
    Display the Commodity Densities command.

[FuelDispatch]DisplayConsolidationPrompt

Applies to

Fuel Dispatch

Description

You can consolidate orders in Call On Demand Order Entry, Oil Field Order Entry, the Card Planner, and the Planning Worksheet. You can separate consolidated orders in Call On Demand Order Entry and Oil Field Order Entry.

By default, the system displays a confirmation message before it completes either task. This setting allows you to eliminate the confirmation request.

Options

  • Y (default)
    The system prompts for a confirmation when you consolidate or unconsolidated orders.

  • N
    No confirmation message appears when you consolidate or unconsolidated orders.

    Note: This option is not applicable to Call On Demand Order Entry. In that window, the system always requires confirmation.

Additional Notes

  1. You cannot dissolve a consolidation in the Card Planner or Planning Worksheet.

  2. This setting does not apply to TMW Operations.

[FuelDispatch]DisplayGanttBar

Applies to

Fuel Dispatch

Description

When using the Card Planner, you might not need to view the Timeline or Gantt bar. You can use this INI setting to turn its display on or off.

Options

  • Y (default)
    Display the Gantt bar on the Card Planner.

  • N
    Do not display the Gantt bar on the Card Planner.

[FuelDispatch]DoColumnChooserDisableIfNotAdmin

Applies to

TMWSuite Add-ins, CRM Right, Fuel Dispatch, Inventory Services, TMW Back Office, TMW eManifest, TMW Operations

Description

If you are a system administrator, you can remove users' ability to use the Field Chooser function for all data grids. This prevents users from adding or removing columns. You can use this INI setting to prevent users who are not system administrators from seeing the Field Chooser.

Options

  • N (default)
    Field Chooser will show on data grids whether the user is a system administrator, supervisor, or user.

  • Y
    Field Chooser will only show on data grids if the user is a system administrator.

Additional Notes

It is recommended that the system administrator also set the ShowResetLayoutForNonSA=N in the [Misc] section of the TTS50.INI. This setting prevents users from resetting a layout back to the factory default.

[FuelDispatch]DoNotDisplayReasonChangeForm

Applies to

Fuel Dispatch

Description

This setting determines if you must enter a reason when changing the shipper or supplier on an order. This setting applies to the Call On Demand Order Entry window and the Mass Change Shipper/Supplier/Account Of window. This mass change window is accessed from the Card Planner or the Planning Worksheet. If a reason is required, the system displays a window where you must select a reason for the change. You can also enter free-form text regarding the change. You cannot continue with the order until you select a reason.

Options

  • Blank, that is, no entry (default)
    You must specify a reason when changing the shipper or supplier for an order.

  • Shipper
    You do not need to enter a reason when you change the shipper.

  • Supplier
    You do not need to enter a reason when you change the supplier.

  • Both
    You do not need to enter a reason when you change the shipper or the supplier.

Additional Notes

If you want to identify specific companies, rather than all shippers or suppliers, that are exempt from requiring a reason for change, see ExcludeFromShipperSupplierChange.

[FuelDispatch]DriverSwitchOutDropTractorDefault

Applies to

Fuel Dispatch

Description

When switching a driver, the system provides the option of keeping (dropping) the original tractor with the trailer. This setting defines the default value for the Drop Tractor check box in the Driver Switch-Out window.

Note: Two other settings in the [FuelDispatch] section of your TTS50 affect this setting:

  • You must have EnableDriverSwitchOutFunction=Y to use this setting.

  • Regardless of which option you specify, users can override the default on a case-by-case basis if you have DriverSwitchOutDropTractorEnable=Y.

Options

  • Y (default)
    When a driver switch-out takes place, keep the tractor with the trailer.

  • N
    When a driver switch-out takes place, replace the tractor on the new trip segment. Set the new tractor ID to UNKNOWN.

    Note: The UNKNOWN tractor ID is not shown in the Driver Switch-Out window. You see it in the trip information shown in the Assignment Plan pane in the Card Planner or Planning Worksheet.

Additional Notes

TMW Operations does not support this setting.

[FuelDispatch]DriverSwitchOutDropTractorEnable

Applies to

Fuel Dispatch

Description

When switching a driver, the system provides the option of keeping (dropping) the original tractor with the trailer. This setting determines whether the Drop Tractor check box is editable in the Driver Switch-Out window.

Note: This setting applies only when you have [FuelDispatch]EnableDriverSwitchOutFunction=Y in your TTS50.

Options

  • N (default)
    The Drop Tractor check box is disabled. It cannot be changed.

  • Y
    The Drop Tractor check box is enabled.

    Note: The default value of the check box is set by the [FuelDispatch]DriverSwitchOutDropTractorDefault setting in your TTS50. When you use this option, you can override the default value.

Additional Notes

TMW Operations does not support this setting.

[FuelDispatch]DriverSwitchOutEmptyMoveBeginEvent

Applies to

Fuel Dispatch

Description

You can set up the Driver Switch-Out feature to create empty moves for transporting drivers to and from the switch-out location. Use this setting to specify the event types the system uses.

Note: This setting applies only when you have these entries in the `[FuelDispatch]`section of your TTS50:

  • EnableDriverSwitchOutFunction=Y

  • DriverSwitchOutEmptyMoveCode is not blank

Options

  • Blank, that is, no entry (default)
    The system assigns the Begin Bobtail (BBT) stop event to the beginning of each empty move.

  • User-specified begin event
    Enter one of the following:

    • BBT
      Begin Bobtail

    • BMT
      Begin Empty

    • IBBT
      Billable Begin Bobtail

    • IBMT
      Billable Begin Empty

    • HMT
      Hook Empty

Additional Notes

TMW Operations does not support this setting.

[FuelDispatch]DriverSwitchOutEmptyMoveCode

Applies to

Fuel Dispatch

Description

When you split a trip using the Driver Switch-Out feature, this setting determines if the system creates empty moves for transporting the drivers affected by the switch out. To have the system create empty moves, you must identify the Trip Type 1 value assigned to the empty moves.

Notes:

  1. Your company defines the Trip Type 1 options using the LghType1 label.

  2. This setting applies only when you have [FuelDispatch]EnableDriverSwitchOutFunction=Y in your TTS50.

Options

  • Blank, that is, no entry (default)
    No empty moves are created for a driver switch out.

  • User-specified TripType1 value
    Specify the Trip Type 1 value you want assigned to empty moves created by the Driver Switch-Out feature. Enter the Abbr field value from the LghType1 label option that identifies the Trip Type 1 value.

    When you make an entry, the system:

    • Creates an empty move for transporting the original driver from the switch-out location to the yard location

      Note: You specify the event type for this empty move using the [FuelDispatch]DriverSwitchOutEmptyMoveBeginEvent setting in your TTS50.

    • Creates a second empty move to transport the new driver from the yard location to the switch-out location

      Note: You specify the event type for this empty move using the [FuelDispatch]DriverSwitchOutEmptyMoveEndEvent setting in your TTS50.

    • Assigns the specified LghType1 option to the empty moves as its TripType1 value

    • Displays the Empty Moves section in the Driver Switch-Out window. You use this section to specify the yard location and the ID of the carrier used to transport the drivers.

Additional Notes

TMW Operations does not support this setting.

[FuelDispatch]DriverSwitchOutEmptyMoveEndEvent

Applies to

Fuel Dispatch

Description

You can set up the Driver Switch-Out feature to create empty moves for transporting drivers to and from the switch-out location. By default, the end stop event on each empty move is End Bobtail (EBT). You use this setting to specify a different ending stop event.

Note: This setting applies only when you have these entries in the `[FuelDispatch]`section of your TTS50:

  • EnableDriverSwitchOutFunction=Y

  • DriverSwitchOutEmptyMoveCode is not blank

Options

  • Blank, that is, no entry (default)
    The system assigns the End Bobtail (EBT) stop event to the end of each empty move.

  • User-specified end event from the list of valid event codes
    Enter one of the following:

    • EBT
      End Bobtail

    • EMT
      End Empty

    • IEBT
      Billable End Bobtail

    • IEMT
      Billable End Empty

    • DMT
      Drop Empty

    • WSH
      Trailer Wash

Additional Notes

TMW Operations does not support this setting.

[FuelDispatch]DrvScheduleReportPath

Applies to

Fuel Dispatch

Description

This setting:

  • Identifies the template used to generate the Driver Schedule Report. You can run the report from the Card Planner, Planning Worksheet, and Reports window.

  • Specifies the location of the template.

Note: To generate reports, you must have the TMW Crystal Reports Redistributable installed. See Installing FuelTMS V.2018.2 and later for additional information.

Options

  • c:\Program Files\TMW Systems, Inc\Fuel Dispatch\Reports\FuelDispatchDriverSchedule01.rpt (default)
    This entry assumes that the default location was accepted when Fuel Dispatch was installed.

    Note: Do not use this entry if you are using SSRS reports. Consult your TMW Business Intelligence representative for assistance.

  • User-specified report
    Enter the absolute path to the default report template if different from the default. For example:

    C:\Fuel Dispatch\Reports\FuelDispatchDriverSchedule01.rpt

  • Blank, that is, no entry
    No report is specified, which results in an error when a user generates a report.

[FuelDispatch]EnableDispatchTripMenuOption

Applies to

Fuel Dispatch

Description

This setting determines whether you can change a trip’s status to Dispatched from the Card Planner or Planning Worksheet. When enabled, the Dispatch Trip option appears in the shortcut menu that you access from the Assignment Plan pane.

Options

  • Y (default)
    Display the Dispatch Trip option in the shortcut menu.

  • N
    Do not display the Dispatch Trip option in the shortcut menu.

[FuelDispatch]EnableDriverSwitchOutFunction

Applies to

Fuel Dispatch

Description

This setting determines whether the Driver Switch-Out feature is available in the Card Planner and Planning Worksheet. To access the feature, you right-click a started trip in the Assignment Plan pane and select Driver Switch-Out in the shortcut menu.

Options

  • N (default)
    Hide the Driver Switch-Out command in the shortcut menu.

  • Y
    Show the Driver Switch-Out command in the shortcut menu.

Additional Notes

TMW Operations does not support this setting.

[FuelDispatch]EnableDriverSwitchOutStopEdit

Applies to

Fuel Dispatch

Description

This setting determines whether a user working in the Driver Switch-Out window can:

  • Edit the Arrive Date and Depart Date fields

  • Use the corresponding Done check box to complete the arrival and/or departure.

Note: This setting applies only when you have [FuelDispatch]EnableDriverSwitchOutFunction=Y in your TTS50.

Options

  • Y (default)
    Users can edit the Arrive Date and the Depart Date fields. They can select the corresponding Done check boxes.

  • N
    Users cannot edit the Arrive Date or the Depart Date fields. They cannot select the corresponding Done check boxes.

Additional Notes

TMW Operations does not support this setting.

[FuelDispatch]EnableProjectedShiftHours

Applies to

Fuel Dispatch V.13.11.44.98 and later

Description

The [FuelDispatch]EnableRoundTripHours=Y setting, along with a round trip hours view, adds a Summary tab to the Card Planner and Planning Worksheet. The tab displays all round trip hours and driver available hours included in the date for which you are planning.

Use this setting to have the Summary tab extend the hours shown to two days after the date used to filter the board.

Options

  • N (default)
    On the Summary tab, do not extend the round trip hours beyond the dates identified for the current board

  • Y
    Extend the driver round trip hours on the Summary tab to include hours from the date of the current board as well as the next two days.

    Notes:

    1. This feature, in conjunction with your mileage interface, requires that the [MileageInterface]DefaultMPH setting in your TTS50 is greater than 0 (zero).

    2. You must also use the PacePlanningTripViewRndTrpHrs outbound planning board view.

Additional Notes

TMW Operations does not support this setting.

[FuelDispatch]EnableRoundTripHours

Applies to

Fuel Dispatch V.15.010.016 and later

Description

Shows a Summary tab in the Card Planner and Planning Worksheet when a round trip hours view is in use. The tab displays all round trip hours and driver available hours included in the date for which you are planning.

Options

  • Y (default)
    Show the Summary tab in the Card Planner and Planning Worksheet.

    Notes:

    1. This feature, in conjunction with your mileage interface, requires that the [MileageInterface]DefaultMPH setting in your TTS50 is greater than 0 (zero).

    2. You must also use the PacePlanningTripViewRndTrpHrs outbound planning board view.

  • N
    Do not show the Summary tab in the Card Planner and Planning Worksheet.

Additional Notes

TMW Operations does not support this setting.

EnableSiteSnapShotMenuOption

Applies to

Fuel Dispatch V.15.010.016

Description

The Site Snap Shot feature shows a graphical representation of each of a store’s tanks. It is available in the Card Planner and Planning Worksheet. You access the Site Snap Shot window using the shortcut menu in the Assignment Plan pane. The snap shot lets you monitor a tank’s:

  • Last reading

  • Estimated current reading

  • Estimated reading in 12 hours

  • Lowest volume allowed before run out

This feature is enabled by default. Use this setting to disable it.

Note: This setting is applicable only when you are using Inventory Services to track consumption and use averages at your customers' stores. Inventory Services is a separately licensed module of TMW’s FuelTMS suite of applications. For more information, contact TMW Sales.

Options

  • Y (default)
    The Site Snap Shot feature is enabled.

  • N
    The Site Snap Shot feature is disabled.

[FuelDispatch]EnforcePriorCommodityRules

Applies to

Fuel Dispatch V.15.20.34.0 and later

Description

The invalid commodity-checking feature ensures that the commodities hauled on a trailer’s consecutive trips are compatible. When the feature is enabled, the system checks for invalid commodity rules when you save a trailer assignment on a trip. The checking takes place in the Card Planner and Planning Worksheet.

When you set up rules for invalid prior commodities, you specify whether a rule:

  • Results in a warning

  • Prevents saving an assignment

This setting controls whether the system will apply the rules defined for the specific commodities on the trailer’s consecutive trips.

Note: This setting is applicable only when you have [FuelDispatch]CheckProductCompatibility=Y in your TTS50.

Options

  • N (default)
    Enforce prior commodity rules.

  • Y
    Do not enforce prior commodity rules.

[FuelDispatch]ExcludeFromShipperSupplierChange

Applies to

Fuel Dispatch

Description

When the system is set up to require reasons for changing the shipper or supplier on an order, this setting allows you to identify companies that can be changed without requiring a reason. This setting applies to shipper and/or supplier changes made in Call On Demand Order Entry and the Mass Change Shipper/Supplier/Account Of window. The mass change window is accessed from the Card Planner or Planning Worksheet.

Notes:

  1. By default, when you change the shipper or supplier on an order in Fuel Dispatch, you must enter a reason for the change. Using the [FuelDispatch]DoNotDisplayReasonChangeForm setting, you can have the system bypass the reason requirement for shippers, suppliers, or both.

  2. When a reason is required for changing a shipper or supplier, any companies that you list in this setting are exempt.

Options

  • Blank, that is, no entry (default)

    If the system is set up to require a reason for changing a shipper or supplier, no companies are excluded from that requirement.

  • Comma-separated list of company IDs
    If certain shippers and suppliers do not require reasons for changes, enter their IDs. Use commas to separate IDs. Do not use spaces.

  • AllCompanies
    No reason is required for changes made to any shipper or supplier.

Additional Notes

TMWSuite and TMW Operations do not support this setting.

[FuelDispatch]FleetRevType

Applies to

Fuel Dispatch; Inventory Services

Description

To enable you to set up user board security, Fuel Dispatch requires that you use one of the four RevType classifications to identify your fleets.

Use this setting to specify the RevType that you have reserved for this purpose.

Options

  • 2 (default)
    Use RevType2.

  • 1
    Use RevType1.

  • 3
    Use RevType3.

  • 4
    Use RevType4.

[FuelDispatch]FreightGridReferenceNumTypes

Applies to

Fuel Dispatch

Description

This setting determines which reference number types (for example BL#, REF,SID,PO#) are mapped to freight reference number fields in the Call On Demand Order Entry window Freight Detail grid. The affected fields are:

  • FreightReferenceNumber

  • FreightReferenceNumber2

  • FreightReferenceNumber3

  • FreightReferenceNumber4

Options

  • Blank, that is, no entry
    No reference number types are associated with the fields.

    Note: Making an entry in one field populates all of them with the same entry. If you click Ref to access the multiple reference number window, it shows your entry, but no type.

  • User-specified list of reference number types
    Specify four reference number types in a comma separated list, with no spaces. Your entries must exactly match the Abbr column value for the reference number types as they are recorded in the ReferenceNumber label. For example:

    FreightGridReferenceNumTypes=BL#,REF,SID,PO#

    The order of your entries determines the fields to which they are mapped. Using the example above,

    • The FreightReferenceNumber field would use BL#

    • The FreightReferenceNumber2 field would use REF

    • The FreightReferenceNumber3 field would use SID

    • The FreightReferenceNumber4 field would use PO#

    Note: When you use this option, you must add the fields to the Freight grid. You add fields using Field Chooser.

[FuelDispatch]GenerateShiftTimesFromManPowerProfile

Applies to

Fuel Dispatch, TMW Operations

Description

Once a shift schedule exists for a driver, the system will automatically generate his/her daily shift schedule on a regular basis when it retrieves the driver on the:

  • Card Planner and Planning Worksheet (Fuel Dispatch)

  • Trip Planner (TMW Operations)

This daily shift schedule is based off the driver’s default template, which includes shift start and end times. However, an individual driver’s start and end times can be different from those established in the shift template.

This setting allows you to identify whether you want the start and end times for the automatically generated shift schedule to be those of the default schedule template, or those saved for the individual driver.

Options

  • N (default)
    Auto-generated driver shift schedules will use the template start and end times from the shift template.

  • Y
    Auto-generated driver shift schedules will use the start and end times saved for the individual driver.

    Note: A driver’s start and end times are recorded in his/her default shift template.

Additional Notes

TMWSuite and CRM Right do not support this setting.

[FuelDispatch]HideDropTractorCheckbox

Applies to

Fuel Dispatch

Description

This setting causes the system to hide or display the Drop Tractor check box in the Split Trip/Drop Trailer window. The check box determines whether the tractor can be dropped along with the trailer when you split a trip.

Options

  • Y (default)
    The Drop Tractor check box is hidden.

  • N
    The Drop Tractor check box is displayed.

Additional Notes

  1. When the check box is hidden, the tractor will not be dropped with the trailer.

  2. When the check box is displayed, it is cleared by default.

[FuelDispatch]MassProductCodeChangeOrderAffectedStatus

Applies to

Fuel Dispatch 17.20

Description

Using the Mass Product Code Change window, you can

  • Change product codes for multiple stores at once

  • Update forecasted orders with the changed product

This setting determines if orders will be updated. If updates are allowed, it also determines which orders are eligible for updating.

The options you use appear in the window’s Orders Affected Status Up To field.

Options

  • PLN (default)
    The system updates all orders with the Available or Planned status.

  • AVL
    The system updates all orders with the Available status.

  • OFF
    No orders are modified. The product code change applies only to new orders.

[FuelDispatch]MaxFullTrailerAmount

Applies to

Fuel Dispatch 2018.4 and later

Description

For non-forecasted sites, it is possible to overload a trailer when entering an order quantity in the Call On Demand Order Entry window Freight tab.

Use this setting to set the maximum full-trailer amount. When configured, the system displays a message if a given quantity is greater than the allowable limit.

For example, setting the value to 8000 will cause the system to validate the QTY, ActualQuantity and NetVolume fields.

  • The QTY field cannot exceed 8000.

  • The ActualQuantity and NetVolume fields cannot be greater than 105% of 8000 (8400).

Options

  • Blank, that is, no entry (default)
    Order-quantity validation does not occur for non-forecasted sites.

  • User-specified number
    Enter a value for the maximum load for non-forecasted sites.

    Note: This setting relies on the [Order]DefaultWgtVolCount INI setting. Validation will not occur if the order’s unit of measure is different from the default unit of measure. For example, if [Order]DefaultWgtVolCount=LBS,GAL,PCS is set and the order uses BBL (Oil Barrels), no validation occurs.

[FuelDispatch]MinimumLoadedPercent

Applies to

Fuel Dispatch, TMW Operations: 15.30.074

Description

The Trailer Autoloading feature can monitor and compare a trailer’s percentage of loading to a minimum percentage your company specifies. These actual and minimum loading percentages apply to combined compartment volume. Loading a trailer below the minimum percentage opens a window that requires you to enter a reason code before you can save the order.

Use this setting to activate the monitoring.

Options

  • 0 (default)
    Disable the monitoring.

  • User-specified percentage
    Enter a value between 1 and 100. The monitoring is enabled and the comparison is made using the percentage specified here.

    Note: When you enable the monitoring, you must also set up reason code options using the ReasonUnderMin label.

[FuelDispatch]MinutesAllowedOutOfRange

Applies to

Fuel Dispatch

Description

Your mobile communication application is configured to transmit GPS location information from a resource on specified intervals. The Mobile Comm (satellite) icon on the Card Planner is ordinarily gray, indicating GPS location information from the resource is being received successfully. This icon turns red when no communication is being received.

This setting allows you to change the length of time that must pass without receiving GPS information before the satellite icon turns red. For accurate results, the setting should be greater than that indicated for your mobile communication application.

For example, if your mobile communication application is set to transmit GPS location information every two minutes, you might not want to wait the default 15 minutes to receive an alert (red satellite icon.)

Options

  • 15 (default)
    Default minutes allowed is 15.

[FuelDispatch]OERelationMode

Applies to

Fuel Dispatch

Description

In Fuel Dispatch, company relationships are a system linking of companies that affects the order entry process in Call On Demand Order Entry. This setting allows you to specify the which company relationship mode is in effect.

Options

  • 0 (default)
    Call On Demand Order Entry will not require that relationships be established between companies.

  • 1
    The global relationship mode is active. When you use global relationships, Call On Demand Order Entry requires predefined relationships between Bill To, shipper, supplier, and Account Of companies.

  • 2
    The Bill To relationship mode is active. When you use the Bill To mode, Call On Demand Order Entry requires predefined relationships for Bill To and consignee companies. For each Bill To/consignee pair, you link shipper, supplier, and Account of companies. With these relationships established, as you move through the Consignee, Shipper, Supplier, and Account Of fields in the Call On Demand Order Entry window, the list of companies you can select are limited to those that have a predefined relationship with the Bill To on the order.

Additional Notes

Regardless of the mode currently enforced, Call On Demand Order Entry provides the ability to switch modes on an order-by-order basis.

[FuelDispatch]OnlyAdminCanSavePublicLayouts

Applies to

Fuel Dispatch, Inventory Services

Description

By default, all users can modify group and global defaults for the Planning Worksheet grid layouts, Card Planner driver and trip layouts, and other Fuel Dispatch and Inventory Services grid and window layouts. Use this setting to prevent users from overwriting these layouts.

Options

  • N (default)
    All users can save modifications for all layouts assigned to them, including group and global defaults.

    Note: If the setting is not present in your INI file, the system default of N will apply.

  • Y
    Only system administrators can save groups and global default layouts. Other users must rename the layout to save modifications.

    Note: If a layout is not the global default or assigned to a group all users can save the layout.

Additional Notes

Fuel Dispatch and Inventory Services are modules in the FuelTMS suite of applications. For more information, contact TMW Sales.

[FuelDispatch]OnlyShowSupplierWithPincode

Applies to

Fuel Dispatch

Description

You can use this INI to force the Call On Demand Order Entry window’s Supplier field to list only suppliers having a PIN code recorded for the consignee/shipper combination recorded on the order. If the Bill To relationship mode is in use, the supplier must have a PIN code recorded for the Bill To/consignee/shipper combination.

Options

  • N (default)
    All suppliers with relationships established with the consignee/shipper will display in the Call On Demand Order Entry window’s Supplier field.

  • Y
    Only suppliers having a PIN code recorded for the consignee/shipper/supplier combination recorded on the order will display in the Call On Demand Order Entry window’s Supplier field.

[FuelDispatch]OrderBoardToolTips

Applies to

Fuel Dispatch

Description

Use this setting to activate stop-level ToolTips on the Available and Priority tabs in the Card Planner and Planning Worksheet. ToolTips show the event code and company ID for each stop. They will also show any comments recorded for a stop.

Options

  • N (default)
    Do not show stop-level information as ToolTips.

  • Y
    Show stop-level information as ToolTips.

[FuelDispatch]OrderEntryTankMode

Applies to

Fuel Dispatch

Description

This setting determines whether the Call On Demand Order Entry window displays both the Freight and Tanks tabs in the freight information section.

  • The Freight tab is used for commodity-based creation of orders.

  • The Tanks tab is used for tank-based creation of orders.

Options

  • OFF (default)
    Only the Freight tab is displayed.

  • N
    The Freight and Tanks tabs are both displayed. The Freight tab is selected by default.

  • Y
    The Freight and Tanks tabs are both displayed. The Tanks tab is selected by default.

Additional Notes

  1. Using the N or Y options require that you have defined a store’s tanks in the Inventory Services module’s Company Tank Setup window. Inventory Services is available when you are licensed for TMW’s Fuel TMS suite of applications. For more information, contact your TMW Sales representative.

  2. When both tabs are displayed, entries on the Freight tab are limited to:

    • Selecting the SB check box to identify that the pickup involves having the tank filled with a mix of different grades of fuel

    • Entering reference numbers

[FuelDispatch]OrderScrollRetrievalCount

Applies to

Fuel Dispatch, Inventory Services

Description

If you are using the Order Scroll window that shipped with Fuel Dispatch builds prior to 2.103.31, that is [Misc]UseNewScrolls=N in your TTS50, you can restrict the number of records that are returned with each record retrieval by entering that number in the setting. Setting this restriction can decrease the time it takes to retrieve matching records from the database.

Note: Records are retrieved by Start Date from earliest to latest.

Options

  • 0 (default)
    All orders that meet your restriction criteria are retrieved.

  • User-defined number of records
    Enter the maximum number of order records to retrieve.

[FuelDispatch]PINCODEOVERWRITE

Applies to

Fuel Dispatch

Description

You can use this INI to specify whether PIN codes can be overwritten in Call On Demand Order Entry.

Options

  • 2 (default)
    When there is no predefined PIN code recorded for the consignee/shipper/supplier combination recorded on the order, a PIN code may be manually entered in Call On Demand Order Entry.

  • 1
    PIN codes cannot be overwritten in Call On Demand Order Entry. They can only be overwritten in the Company Profile - Relations window.

  • 3
    PIN codes may be recorded or overwritten in the Call On Demand Order Entry.

[FuelDispatch]PriorAlertloginMinutes

Applies to

Fuel Dispatch

Description

This setting affects the Log box in the Card Planner’s Driver Shift pane. It specifies when the box is to turn red to alert dispatchers that a driver has not logged in and the shift start time is imminent or has passed.

Options

  • 5 (default)
    The Log box will turn red 5 minutes before the driver’s shift start time.

  • User-specified number of minutes
    Enter the number of minutes before the shift start time the box will turn red.

Additional Notes

This setting is functional only when you have [FuelDispatch]AlertNoLoginStatus=Y in your TTS50.

[FuelDispatch]PriorWarnLoginMinutes

Applies to

Fuel Dispatch

Description

This setting affects the Log box in the Card Planner’s Driver Shift pane. It specifies when the box is to turn yellow to warn dispatchers that a driver has not logged in and may be late to work.

Options

  • 15 (default)
    The box turns yellow 15 minutes before the shift start time.

  • User-specified number of minutes
    Enter the number of minutes before the shift start time the box will turn yellow.

Additional Notes

This setting is functional only when you have [FuelDispatch]AlertNoLoginStatus=Y in your TTS50.

[FuelDispatch]ProfileEditDisabled

Applies to

Fuel Dispatch

Description

Master file records, also known as profiles, are usually created and edited in File Maintenance.

This setting determines whether users who have access to the TMWSuite File Maintenance application can edit data when they access profile information from within Fuel Dispatch.

Note: In Fuel Dispatch:

  • Profiles can be accessed from a scroll window, where you retrieve records, select one, and click the Profile button.

  • Profiles can be accessed from a grid or data entry window, where you right-click on the ID for a company, resource, or commodity in the grid/window. In the shortcut menu that opens, select View Profile.

  • Commodity profiles can be accessed directly in the Commodity Profile window by selecting Maintenance > Commodity Maintenance.

Options

  • Y (default)
    Users cannot edit profiles in Fuel Dispatch.

    Note: This option affects all Fuel Dispatch users, even those with system administrator and/or supervisor rights.

  • N
    Users can edit profiles in Fuel Dispatch.

Additional Notes

  1. Inventory Services does not support this setting.

  2. TMW Operations ignores this setting. It uses the [.NetOperations]ProfileEditDisabled setting.

[FuelDispatch]QtysToPromptAutoload

Applies to

Fuel Dispatch

Description

The Freight Details section of the Call on Demand Order Entry window contains columns for entering Qty, ActualQuantity, and NetVolume on an order. Use this setting to identify which of these quantities Fuel Dispatch uses to search for and display an existing autoload profile. If a profile is found, quantities of the specified type are displayed in the Ordered Vol x fields in the Trailer Autoload window.

Options

  • ACT (default)
    Search for and display autoload profiles based on ActualQuantity.

  • ORD
    Search for and display autoload profiles based on QTY (ordered volume).

  • NET
    Search for and display autoload profiles based on NetVolume.

[FuelDispatch]RecurringJobOrders

Applies to

Fuel Dispatch

Description

Provides the Recurring Job check box in the Additional Order Header Information window. This check box is used to mark a multi-job order as recurring.

Options

  • N (default)
    The Recurring Job check box is not present in the Additional Order Header Information window. A multi-order job with zero available orders is canceled.

  • Y
    The Recurring Job check box is present in the Additional Order Header Information window.

    • When the check box is selected, a job order is marked as recurring. The job order is not canceled when the remaining order count reaches zero. Orders can be added later.

    • When the check box is cleared, a job order is marked as non-recurring. A multi-order job with zero available orders is canceled.

[FuelDispatch]ReferenceNumberValidityChecks

Applies to

Fuel Dispatch, TMW Operations

Description

This setting determines whether the system enforces reference number requirements set up for the Bill To company.

Options

  • Y (default)
    Enforce reference number requirements.

  • N
    Do not enforce reference number requirements.

Additional Notes

Reference number requirements are set up in the Company Order Requirements window in the Bill To company’s profile. This window is available only in TMWSuite’s File Maintenance application.

[FuelDispatch]RelationshipValidationOnSave

Applies to

Fuel Dispatch

Description

By default, Fuel Dispatch does not check the validity of relationships when you make changes to a saved order. That is because when you are using the global or Bill To relationship mode, the relationships are checked as you create and save the order.

You can use this INI to set how strictly the system will enforce valid relationships when you change an already saved order in Call On Demand Order Entry.

Options

  • 0 (default)
    When you save changes to existing orders, the system will not check that the companies on the order have established relationships or that the commodity on the order is linked to the consignee.

  • 1
    When you save changes to existing orders, the system will verify that the companies on the order have established relationships and that the commodity class on the order is one recorded in the consignee’s profile. If any companies on the order are missing a relationship with one of the other companies, or if the commodity class is not linked to the consignee a warning message will be displayed. You will be asked if you still want to save the order.

    Note: When this option is used while Learning Mode is activated, saving an order after receiving the warning will temporarily disable Learning Mode, i.e., the system will not record a new relationship based on the change to the order.

  • 2
    The system will verify that the companies on the order have established relationships and that the commodity class of the commodity on the order is one recorded in the consignee’s profile when you save changes to existing orders in Call On Demand Order Entry. If no relationship exists for companies on the order, or if the commodity class is not linked to the consignee a warning message will be displayed. You will be asked if you still want to save the order. You will not be allowed to save the order.

[FuelDispatch]ScheduledLoadCheck

Applies to

Fuel Dispatch 17.60 and later

Description

This setting enables additional load checking in the Card Planner and Planning Worksheet. For orders with the same consignee and commodity, only the order with the earliest arrival time (retain date) can be planned. A system warning will display in these scenarios:

  • A Planned (PLN), Dispatched (DSP), or Started (STD) order with the same commodity and consignee, and a later delivery date than the order is dragged to the shift.

  • An Available (AVL) order with the same commodity and consignee, and an earlier delivery date than the order is dragged to the shift.

First available in V.2023.3 and later:

  • You can ignore the warning and plan the order when there is an earlier AVL order. In prior versions, you could only ignore a system warning about a later PLN/DSP/STD order.

  • The validation will no longer run for orders that were not created by the Forecaster.

Options

  • Y (default)
    The system enforces the earliest-arrival-time rule when planning.

  • N
    The system allows planning an order regardless of arrival time.

Additional Notes

When the system warning displays:

  • Clicking OK plans the first available order.

  • Clicking Cancel reverts the planning board to the previous state.

[FuelDispatch]SetBillToFromConsignee

Applies to

Fuel Dispatch

Description

When you create a company profile in the TMWSuite File Maintenance application, you can designate the company as a consignee, and also specify a Bill To company to be associated with the profile company.

The SetBillToFromConsignee setting controls whether the Bill To field in the Call On Demand Order Entry screen defaults automatically to the Bill To specified in the consignee company’s profile. Make your entry as follows:

Options

  • N (default)
    In the Call On Demand Order Entry screen, the Bill To field does not default to a company ID when you enter an ID in the Consignee field. The user must specify the Bill To.

  • Y
    When you enter a company ID in the Call On Demand Order Entry screen’s Consignee field, the Bill To field defaults to the Bill To company ID specified in the consignee’s company profile.

Additional Notes

When SetBillToFromConsignee=Y:

  • In Company File Maintenance:

    1. A Bill To should be set up for each company designated as a consignee.

    2. To prevent billing problems, the Bill To check box should be cleared on the consignees' profiles.

  • In Call On Demand Order Entry:

    1. Enter a company ID in the Consignee field; the Bill To field will auto-populate. Do not enter or change the ID in the Bill To field.

    2. If the trip has more than one drop stop, only the first drop will result in the Bill To field being filled in.

    3. To preserve valid company relationships when you use this setting, it is suggested you also set RelationshipValidationOnSave=2 to perform validation checks.

[FuelDispatch]SetCodoeInitialFocusConsignee

Applies to

Fuel Dispatch 014.010.029

Description

This setting determines whether the system puts focus on the Bill To field or the Consignee field when creating a new order in Call On Demand Order Entry.

Options

  • N (default)
    Sets initial focus in the Bill To field.

  • Y
    Sets initial focus in the Consignee field.

    Note: This option is most useful when your system retrieves the Bill To based on the consignee on the order.

Additional Notes

This setting affects retrieving existing orders, as well as creating new ones.

[FuelDispatch]SetRevTypesByConsignee

Applies to

Fuel Dispatch

Description

This setting determines how values for the RevType1 - 4 fields are set when you create an order in the Call On Demand Order Entry window.

Options

  • Y (default)
    The system will copy the revenue type values from the consignee’s profile to the order. If there are multiple consignees on the order, the revenue types from the consignee on the first delivery are used.

  • N
    Revenue types must be entered manually.

Additional Notes

  1. During the setup for Fuel Dispatch, your company may have chosen RevType1 to identify its terminals. If you prefer to copy the RevType1 value from the profile of the user instead of the consignee, you must do the following:

    • Use the N option for this setting.

    • Set [FuelDispatch]DefaultUserTerminalOnNewOrder=Y in your TTS50.ini file.

    Be aware that, with this setup, users must enter RevType2 - 4 values manually on orders.

  2. TMWSuite and TMW Operations do not support this setting.

[FuelDispatch]ShiftLogoutCompleteReviewNeeded

Applies to

Fuel Dispatch

Description

This setting is applicable when you manually log out a driver in the Card Planner or Planning Worksheet and set all unfinished trips to a Completed status at the same time. It determines:

  • How the completed orders' invoice status is set

  • Whether the orders are flagged for review before they can be invoiced.

Flagged orders are reviewed in Call On Demand Order Entry.

Options

  • PROMPT (default)
    When a driver is logged out manually, show a message asking if incomplete orders should have their invoice status set to Available. This status makes orders ready for billing. If the user indicates the invoice status should be set to Pending instead, flag the orders for review. Flagged orders must be reviewed before being they can be invoiced. The orders are reviewed in Call On Demand Order Entry.

  • Y
    When the driver is logged out, automatically:

    • Set the orders' invoice status to Pending, making them ineligible for billing.

    • Flag the orders as needing review before billing can occur. Flagged orders must be reviewed before being they can be invoiced. The orders are reviewed in Call On Demand Order Entry.

  • N
    When the driver is logged out, automatically set the orders' invoice status to Available. Do not require a review of the orders before billing them.

[FuelDispatch]ShowOilFieldOrderEntry

Applies to

Fuel Dispatch

Description

This setting enables the Oil Field Order Entry feature in the Fuel Dispatch application. When it is enabled, the Oil Field Order Entry command appears in the Application menu.

Options

  • N (default)
    Disable the Oil Field Order Entry feature.

    Note: If you are not using Oil Field Order Entry, this option prevents conflicts with standard Fuel Dispatch functionality.

  • Y
    Enable the Oil Field Order Entry feature.

[FuelDispatch]ShowWarnings

Applies to

Fuel Dispatch

Description

The Save Warnings window can provide notification of conflicts pertaining to order entry and trip asset assignments in Call On Demand Order Entry, Card Planner, and Planning Worksheet.

Based on the conflict’s severity, the system can issue either a Prevent Save message that prohibits saving an order or a Warn message that allows saving an order.

By default, the Save Warnings window displays a Prevent Save message only when a trip resource causes a severe conflict. For example, the system prevents you from saving the assignment when a resource:

  • Does not meet a must load requirement

  • Has a Priority 1 expiration

  • Is already started on another trip that overlaps with the planned assignment

The Save Warnings window displays a Warn message for minor conflicts. The system allows you to save an order or an assignment. For example, the system could issue a warning when you try to schedule a delivery during a store’s closed hours.

This setting determines whether the Save Warnings window opens for both Prevent Save and Warn conflicts.

Options

  • N (default)
    Display the Save Warnings window for a Prevent Save conflict only.

  • Y
    Display the Save Warnings window for either Prevent Save or Warn conflicts.

[FuelDispatch]SortClosestSplitByHistoryDays

Applies to

Fuel Dispatch: 15.40 and later

Description

In the Card Planner and Planning Worksheet, you can sort orders based on consolidation history. The system looks at the store’s completed orders to determine how many times its orders were consolidated with those for other stores.

This setting determines how many days back the system looks for paired consignees.

Options

  • 21 (default)
    The system looks back 21 days for paired consignees.

  • User-defined number of days
    Enter the number of days you want the system to look back for paired consignees.

Additional Notes

TMWSuite and TMW Operations do not support this setting.

[FuelDispatch]SortFreightCommodityClassDisplayOrder

Applies to

Fuel Dispatch

Description

Use this setting to control the sequence in which commodities appear in these places:

  • Saved orders viewed in Call On Demand Order Entry
    Note: This functionality is overridden if you have:

    • [FuelDispatch]SortFreightFromGridLayout=Y in your TTS50

      and

    • Saved the grid layout in a specific sort order

    The order in the grid layout is used instead of the sequence specified in the Commodity Classes window.

  • The order ToolTip available in the Card Planner and Planning Worksheet

You specify a sequence for Commodity Class 1 or Class 2. The class’s sequence is used for any commodity in that class.

Options

  • N (default)
    List commodities in the order they were entered in the Commodity Classes window. Ignore the ccl_displayorder column entries in the Commodity Classes window.

  • Y
    List commodities in the order specified in the Commodity Classes window’s ccl_displayorder column.

Additional Notes

To view the order information ToolTip, you must have [FuelDispatch]UseCustomCardPlannerToolTip=Y in your TTS50. The ToolTip is available in the Card Planner and the Planning Worksheet.

[FuelDispatch]SortFreightGridFromLayout

Applies to

Fuel Dispatch

Description

Use this setting to always display commodities according to the sort order of the saved grid’s layout.

Options

  • N (default)
    Display commodities in the sequence entered on the order. If [FuelDispatch]SortFreightCommodityClassDisplayOrder=Y, show them in the order specified in the Commodity Classes window’s ccl_displayorder column.

  • Y
    Always display the commodities according to the sort order of the saved grid’s layout.

[FuelDispatch]SupplierRequired

Applies to

Fuel Dispatch

Description

This INI setting affects the Call On Demand Order Entry screen. It determines whether you are required to enter a supplier before you save an order.

Options

  • Y (default)
    A supplier is required.

  • N
    A supplier is not required.

[FuelDispatch]TankSetupCompanyTypeFilter

Applies to

Fuel Dispatch, Inventory Service

Description

This setting determines which company types can be retrieved for tank setup.

In Fuel Dispatch, it enables the Tanks tab in the Company Relations Profile window for consignees and/or shippers.

In Inventory Services, it allows setup in the Company Tank Setup window for consignees and/or shippers.

Options

  • C (default)

    • Fuel Dispatch
      The Tanks tab in the Company Relations Profile window is enabled only for companies designated as consignees.

    • Inventory Services
      Only companies designated as consignees can be retrieved in the Company Tank Setup window.

  • S

    • Fuel Dispatch
      The Tanks tab in the Company Relations Profile window is enabled only for companies designated as shippers.

    • Inventory Services
      Only companies designated as shippers can be retrieved in the Company Tank Setup window.

      Note: When you use this option and you have [StopOrderEntry]IsProducingEnablesTanks=Y, only tanks that are actively producing are available in Oil Field Order Entry. Active tanks have the Is Producing check box selected in their profile.

  • CS or SC

    • Fuel Dispatch
      The Tanks tab in the Company Relations Profile window is enabled for companies designated as consignees or shippers.

    • Inventory Services
      Companies designated as consignees or shippers can be retrieved in the Company Tank Setup window.

      Note: When you use this option and you have [StopOrderEntry]IsProducingEnablesTanks=Y, only tanks that are actively producing are available in Oil Field Order Entry. Active tanks have the Is Producing check box selected in their profile.

Additional Notes

For oil fields, shippers are often referred to as leases.

[FuelDispatch]TerminalRevType

Applies to

Fuel Dispatch; Inventory Services

Description

To enable you to set up user board security, Fuel Dispatch requires that you use one of the four RevType classifications to identify your terminals.

Use this setting to specify the RevType that you have reserved for this purpose

Options

  • 1 (default)
    Use RevType1.

  • 2
    Use RevType2.

  • 3
    Use RevType3.

  • 4
    Use RevType4.

[FuelDispatch]ThirdPartyInterfacesMenuVisible

Applies to

Fuel Dispatch

Description

This setting controls whether the Third Party Interface command is available in Fuel Dispatch. When enabled, the command appears in the Maintenance menu. It provides access to windows where you set up interface options for third-party systems, such as FuelQuest.

Options

  • N (default)
    The Third Party Interfaces command does not appear in the Maintenance menu.

  • Y
    The Third Party Interfaces command is displayed in the Maintenance menu.

Additional Notes

TMWSuite, CRM Right, TMW Operations, and Inventory Services do not support this setting.

[FuelDispatch]TrailerTypeDwellTime

Applies to

Fuel Dispatch

Description

This setting identifies the TrlType1-4 label used to define trailer dwell times.

Note: Access TrlType1-4 labels using the System Administration application. To assign a trailer dwell time to a label option, enter the time in whole minutes in the ExtraString1 field. You can record dwell times in existing label option or create new ones specifically for dwell times.

Options

  • 1 (default)
    Use the TrlType1 label.

  • 2
    Use the TrlType2 label.

  • 3
    Use the TrlType3 label.

  • 4
    Use the TrlType4 label.

Additional Notes

  1. The trailer dwell time feature must be enabled with [FuelDispatch]UseTrailerDwellTime=Y.

  2. This setting does not apply to TMWSuite or TMW Operations.

[FuelDispatch]TripEditDisabledOnInvoice

First available in

Fuel Dispatch

Description

Prevent editing of invoiced orders in the Deadhead/Trip Editor window. You can disable all changes, or you can allow only the trip’s arrival and departure dates/times to be changed.

Options

  • N (default)
    Invoiced orders can be changed in the Deadhead/Trip Editor window.

  • Y
    Invoiced orders cannot be changed in the Deadhead/Trip Editor window.

    Opening an invoiced order in the window results in the "The move has an invoice and cannot be modified" warning message.

  • T
    Only the arrival and departure dates/times of an invoiced order can be changed in the Deadhead/Trip Editor window.

    Opening an invoiced order in the window results in the "The move has an invoice and only the arrival and departure dates/times can be modified" warning message.

Additional Notes

When you use the Y or T option, this setting looks at the [Order]InvoiceStatusEditLocks INI setting in your TTS50 to determine which statuses will prevent changes to an order in the Deadhead/Trip Editor window. When an order has an invoice status that is not in your entry for that setting, it can be edited.

[FuelDispatch]TripEditDisabledOnStl

First available in

Fuel Dispatch

Description

Prevent orders from being edited in the Deadhead/Trip Editor window after pay details have been created for the assigned assets. You can disable all changes, or you can allow only the trip’s arrival and departure dates/times to be changed.

Options

  • N (default)
    Orders can be changed in the Deadhead/Trip Editor window after pay details have been created.

  • Y
    Orders cannot be changed in the Deadhead/Trip Editor window after pay details have been created.

    If a user opens an order in the window, a warning message indicates that the trip segment is in settlements, or partly settled, and cannot be modified.

  • T
    After pay details have been created, you can change only the arrival and departure dates/times for an order in the window’s Arrive/Depart Date column.

    If you open an order in the window, a warning message indicates that the trip segment is in settlements, or partly settled, and that only the arrival and departure dates/times can be modified.

Additional Notes

If [Dispatch]BlockEditLevelAfterStl=N in your TTS50, the order can be changed when you use the Y or T options.

[FuelDispatch]TripSheetReportPath

Applies to

Fuel Dispatch

Description

This setting:

  • Identifies the template used to generate the Trip Sheet Report. You can run the report from the Card Planner, Planning Worksheet, and Reports window.

  • Specifies the location of the template.

Note: To generate reports, you must have the TMW Crystal Reports Redistributable installed. See Installing FuelTMS V.2018.2 and later for additional information.

Options

  • c:\Program Files\TMW Systems, Inc\Fuel Dispatch\Reports\FuelDispatchTripSheet04.rpt (default)
    This entry assumes that the default location was accepted when Fuel Dispatch was installed.

    Note: Do not use this entry if you are using SSRS reports. Consult your TMW Business Intelligence representative for assistance.

  • User-specified report
    Enter the absolute path to the default report template if different from the default. For example:

    C:\Fuel Dispatch\Reports\FuelDispatchTripSheet04.rpt

  • Blank, that is, no entry
    No report is specified, which results in an error when a user generates a report.

[FuelDispatch]TripSummaryReportPath

Applies to

Fuel Dispatch

Description

This setting:

  • Identifies the template used to generate the Trip Summary Report. You can run the report from the Card Planner, Planning Worksheet, and Reports window.

  • Specifies the location of the template.

Note: To generate reports, you must have the TMW Crystal Reports Redistributable installed. See Installing FuelTMS V.2018.2 and later for additional information.

Options

  • c:\Program Files\TMW Systems, Inc\Fuel Dispatch\Reports\FuelDispatchTripSummary01.rpt (default)
    This entry assumes that the default location was accepted when Fuel Dispatch was installed.

    Note: Do not use this entry if you are using SSRS reports. Consult your TMW Business Intelligence representative for assistance.

  • User-specified report
    Enter the absolute path to the default report template if different from the default. For example:

    C:\Fuel Dispatch\Reports\FuelDispatchTripSummary01.rpt

  • Blank, that is, no entry
    No report is specified, which results in an error when a user generates a report.

[FuelDispatch]UseAltIDField

Applies to

Fuel Dispatch

Description

When you create a consignee’s company profile, you can designate a user-defined code to be used as the alternate ID. This code often represents an ID from another computer system, such as an accounting code.

This setting determines whether the system automatically populates the Consignee, and Customer Name and Address fields in the Call On Demand Order Entry screen when you make an entry in the Alt ID field.

Options

  • Y (default)
    When you enter an alternate ID in the Call On Demand Order Entry screen’s Alt ID field, the Consignee, and Customer Name and Address fields automatically populate.

  • N
    Disables the functionality that enables an entry in the Alt ID field in the Call On Demand Order Entry screen to automatically populate the Consignee fields.

[FuelDispatch]UseCompanyCommodityDwellTime

Applies to

Fuel Dispatch

Description

This setting determines how the system will determine the dwell times to use when calculating the departure times from pickups and drops on orders you created in Call On Demand Order Entry.

General dwell times can be recorded for shipper and consignee companies in their profiles. You can also record commodity-specific dwell times for each commodity a shipper handles and each commodity a consignee can receive.

Options

  • N (default)
    The system will ignore dwell times recorded for the shipper/commodity combination and the consignee/commodity combination used on the order.

    • It will use the general dwell time recorded for the shipper to calculate the departure time from the order’s pickup.

    • It will use the general dwell time recorded for the consignee when calculating the departure time from the order’s drop.

    Notes: If no dwell time is recorded for the shipper or the consignee, the system will:

    • Use the value recorded for the DefaultLoadUnloadDwellTimeMinutes setting in the [FuelDispatch] section of your TTS50.ini file as the dwell time for each stop.

    • If the DefaultLoadUnloadDwellTimeMinutes setting does not exist in your INI file, the system will use the default dwell time of 30 minutes for each stop.

  • Y
    The system will use the dwell time recorded for the shipper/commodity combination used on the order to calculate the departure time from the order’s pickup. It will use the dwell time recorded for the consignee/commodity combination used on the order to calculate the departure time from the order’s drop.

    Note: When this option is used, the system follows this hierarchy to determine the dwell time for a stop:

    1. Uses the dwell times recorded for the commodity in the company’s profile. If the order contains multiple commodities having different dwell times, the system uses the larger/largest dwell time for the stop.

    2. If no dwell time is recorded for the commodity, it uses the general dwell time recorded in the company’s profile.

    3. If no general dwell time is recorded in the company’s profile, it uses the value recorded for the DefaultLoadUnloadDwellTimeMinutes INI setting.

    4. If the DefaultLoadUnloadDwellTimeMinutes setting does not exist in your INI file, the system will use the default dwell time of 30 minutes for each stop.

[FuelDispatch]UseCompanyCreditHoldStatus

Applies to

Fuel Dispatch

Description

This setting determines how the system handles the saving of orders in Call On Demand Order Entry when the Bill To used on the order has a credit status at the Prevent or Warn level.

Options

  • No (default)
    Do not check the credit status assignment of the Bill To on the order.

  • Yes
    Check the credit status assignment of the Bill To on the order.

    When this option is used, the system will:

    • Allow the saving of an order when the Bill To on the order has a credit check status at the OK level.

    • Not allow an order to be saved when the Bill To on the order has a credit check status at the Prevent level.

    Require the user to enter an override reason before allowing an order to be saved when the Bill To on the order has a credit check status at the Warn level.

Additional Notes

Credit statuses are defined using the CreditHoldStatus label. The status’s Code field value determines its level of severity. Three basic levels are used by the system:

  • OK
    The option’s Code value is 1-99

  • Warn
    The option’s Code value is between 100 - 900

  • Prevent
    The option’s Code field is value higher than 900.

[FuelDispatch]UseCompanyTankModelHistory

Applies to

Fuel Dispatch 16.20

Description

This setting determines which table third-party applications use to calculate gross barrels.

  • The Company_tankdetail table contains general tank information, such as tank size, company ID, and a single tank model ID.

  • The CompanyTankModel table contains a record of all changes made to a lease’s tank model ID, such as the dates/times the model ID was changed. This table provides more accurate readings because it associates the tank model ID with a date range.

Options

  • N (default)
    Use the Company_tankdetail table to calculate gross barrels.

  • Y
    Use the CompanyTankModel table to calculate gross barrels.

Additional Notes

  1. Inventory Services does not support this setting.

  2. This setting affects how third-party software calculates gross barrels. It does not affect the Oil Field Order Entry window.

[FuelDispatch]UseCustomCardPlannerToolTip

Applies to

Fuel Dispatch

Description

Use this setting to show the supplier of each commodity for an order in the Card Planner and Planning Worksheet ToolTips.

Options

  • N (default)
    Show the supplier of only the first commodity for an order in the Card Planner and Planning Worksheet ToolTips.

  • Y
    Show the supplier of each commodity for an order in the Card Planner and Planning Worksheet ToolTips.

[FuelDispatch]UseHotKeyOnAccountOf

Applies to

Fuel Dispatch

Description

By default, in Call On Demand Order Entry, you can toggle between no company relationships mode, the Global company relationships mode, and the Bill To company relationships mode using the F2 key. You can use this setting to disable this functionality in the Account Of field.

In Call On Demand Order Entry, when you click in an Account Of field, a message displays stating which company relationship mode is in effect. The message also says you can switch the mode by pressing F2.

Options

  • Y (default)
    The F2 key can be used to toggle between company relationships modes in Call On Demand Order Entry window’s Account Of field.

  • N
    The F2 key cannot be used to toggle between company relationships modes in Call On Demand Order Entry window’s Account Of field.

    Note: When this option is used, the Current OE Relationship Mode message does not display when you click in the Account Of field.

[FuelDispatch]UseHotKeyOnBillTo

Applies to

Fuel Dispatch

Description

By default, in Call On Demand Order Entry, you can toggle between no company relationships mode, the Global company relationships mode, and the Bill To company relationships mode using the F2 key. You can use this INI setting to disable this functionality in the Bill To field.

In Call On Demand Order Entry, when you click in a company field, a message displays stating which company relationship mode is in effect. The message also says you can switch the mode by pressing F2.

Options

  • Y (default)
    The F2 key can be used to toggle between company relationship modes in Call On Demand Order Entry window’s Bill To field.

  • N
    The F2 key cannot be used to toggle between company relationship modes in Call On Demand Order Entry window’s Bill To field.

    Note: When this option is used, the Current OE Relationship Mode message does not display when you click in the Bill To field.

[FuelDispatch]UseHotKeyOnCommodity

Applies to

Fuel Dispatch

Description

By default, in Call On Demand Order Entry, you can toggle between no company relationships mode, the Global company relationships mode, and the Bill To company relationships mode using the F2 key. You can use this setting to disable this functionality in the Cmd Code (commodity) field.

In Call On Demand Order Entry, when you click in a commodity field, a message displays stating which company relationship mode is in effect. The message also says you can switch the mode by pressing F2.

Options

  • Y (default)
    The F2 key can be used to toggle between company relationships modes in Call On Demand Order Entry window’s Cmd Code field.

  • N
    The F2 key cannot be used to toggle between company relationships modes in Call On Demand Order Entry window’s Cmd Code field.

    Note: When this option is used, the Current OE Relationship Mode message does not display when you click in the Cmd Code field.

[FuelDispatch]UseHotKeyOnConsignee

Applies to

Fuel Dispatch

Description

By default, in Call On Demand Order Entry, you can toggle between no company relationships mode, the Global company relationships mode, and the Bill To company relationships mode using the F2 key.

In Call On Demand Order Entry, when you hover the cursor over a company field, a message displays stating which company relationship mode is in effect. The message also says you can switch the mode by pressing F2.

Options

  • Y (default)
    The F2 key can be used to toggle between company relationship modes in Call On Demand Order Entry window’s Consignee field.

  • N
    The F2 key cannot be used to toggle between company relationship modes in Call On Demand Order Entry window’s Consignee field.

    Note: When this option is used, the Current OE Relationship Mode message does not display when you click in the Consignee field.

[FuelDispatch]UseHotKeyOnShipper

Applies to

Fuel Dispatch

Description

By default, in Call On Demand Order Entry, you can toggle between no company relationships mode, the Global company relationships mode, and the Bill To company relationships mode using the F2 key. You can use this setting to disable this functionality in the Shipper field.

In Call On Demand Order Entry, when you click in a shipper field, a message displays stating which company relationship mode is in effect. The message also says you can switch the mode by pressing F2.

Options

  • Y (default)
    The F2 key can be used to toggle between company relationships modes in Call On Demand Order Entry window’s Shipper field.

  • N
    The F2 key cannot be used to toggle between company relationships modes in Call On Demand Order Entry window’s Shipper field.

    Note: When this option is used, the Current OE Relationship Mode message does not display when you click in the Shipper field.

[FuelDispatch]UseHotKeyOnSupplier

Applies to

Fuel Dispatch

Description

By default, in Call On Demand Order Entry, you can toggle between no company relationships mode, the Global company relationships mode, and the Bill To company relationships mode using the F2 key. You can use this setting to disable this functionality in the Supplier field.

In Call On Demand Order Entry, when you click in a supplier field, a message displays stating which company relationship mode is in effect. The message also says you can switch the mode by pressing F2.

Options

  • Y (default)
    The F2 key can be used to toggle between company relationships modes in Call On Demand Order Entry window’s Supplier field.

  • N
    The F2 key cannot be used to toggle between company relationships modes in Call On Demand Order Entry window’s Supplier field.

    Note: When this option is used, the Current OE Relationship Mode message does not display when you click in the Suppliers field.

[FuelDispatch]UseSSRSReports

Applies to

Fuel Dispatch

Description

This setting controls the default reporting application. There are two options:

  • Crystal Reports

  • SQL Server Reporting Services (SSRS)

Note: To generate reports, you must have the TMW Crystal Reports Redistributable installed. See Installing FuelTMS V.2018.2 and later for additional information.

Options

  • N (default)
    Use Crystal Reports.

  • Y
    Use SSRS.

    Note: Before enabling SSRS, consult your TMW Business Intelligence representative for assistance.

  • Blank, that is, no entry
    The default option is used.

[FuelDispatch]UseTrailerDwellTime

Applies to

Fuel Dispatch

Description

This setting activates the trailer dwell time feature and makes the Dwell Time field available in trailer profiles.

Note: In Fuel Dispatch, you access trailer profiles through the Trailer Scroll window. The field appears on the Trailer Profile window’s Information tab.

Options

  • N (default)
    Disable the trailer dwell time feature.

    Note: When this option is used, the Dwell Time field is not available.

  • Y
    Enable the trailer dwell time feature.

    Notes:

    1. When this option is used, the Dwell Time field is available.

    2. You must also use the [FuelDispatch]TrailerTypeDwellTime setting to identify the TrlType label that defines dwell times.

    3. When you use this option, the Dwell Time field is added to the Trailer Profile window in TMW Operations. However, dwell times defined by a TrlType1-4 label are not functional.

Additional Notes

This setting does not apply to TMWSuite or TMW Operations.

[FuelDispatch]ValidateShipperCommodities

Applies to

Fuel Dispatch

Description

Use this setting to restrict available commodities in Call On Demand Order Entry if the shipper has a shipper commodity set up. When the setting is enabled, if commodities are listed under the Shipper Cmds tab in the Company Relations Profile; those commodities can be pulled from that shipper on the order in Call On Demand Order Entry.

Options

  • N (default)
    Call On Demand Order Entry will allow freight for any of the consignee tanks, regardless of whether or not the shipper can supply it.

  • Y
    The Freight Detail header section of Call On Demand Order Entry will validate if there is a shipper commodity before allowing freight to be added to the order.

    Note: Starting in V.2023.1, this option also restricts shipper options to companies that have a given freight row’s commodity while using the Bill To relationship mode ([Fuel Dispatch] OERelationMode=2). If a product is not available at the shipper it cannot be added to the order. If a shipper is not set up with the commodity for the Bill To and Consignee, the freight row default shipper will be UNKNOWN.

[InventoryService] settings

[InventoryService]AutoLockVolumeOnVolumeChange

Applies to

Fuel Dispatch: 2016.10

Description

This setting determines whether the system locks a forecasted order automatically, when you change a commodity’s delivery volume.

You can make the change in the following windows in Fuel Dispatch:

  • Forecast Order Review

  • Forecast Order Site Review

Options

  • N (default)
    Do not lock a forecasted order automatically when a delivery volume changes.

  • Y
    Lock a forecasted order automatically when a delivery volume changes.

    Notes:

    1. To use this option, you must have [FuelDispatch]OrderEntryTankMode=OFF in your TTS50.

    2. This option applies to unlocked, forecasted orders with a dispatch status of Available (AVL). When you attempt to alter a delivery value on a forecasted order with a status other than AVL, the system:

      • Does not accept the value change

      • Selects the LockVolume check box automatically

[InventoryService]CalculateRVP

Applies to

Fuel Dispatch, Inventory Services

Description

Enables the calculation of Reid Vapor Pressure (RVP) for a store’s commodity based on the commodity tank reading, and the quantity and RVP of delivered commodity.

Options

  • N (default)
    Disable the calculation of RVP.

  • Y
    Enable the calculation of RVP.

Additional Notes

This setting affects Fuel Dispatch as well as Inventory Services. Both applications are involved in calculating and displaying RVP.

[InventoryService]CrossDumpTolerance

Applies to

Fuel Dispatch V.2021.3 and later

Description

Cross Dump notifications give dispatchers advance notice that the wrong product could have been delivered to a tank. The system looks at the tank volume and compares the expected volume based on previous readings, the last delivery, and sales history with the current reading. This setting controls the tolerance level used to detect a Cross Dump at a destination. If the reading exceeds the tolerance level, a notification is needed. The higher the number you enter, the more tolerant the variance is. The lower the number you enter, the more strict the tolerance is.

Options

  • 20 (default)
    The system default level.

  • User-specified number
    Make your entry as a whole number.

[InventoryService]ForecastSplitWindows

Applies to

Fuel Dispatch, Inventory Services

Description

When the same resources deliver the same product to multiple stores, it is known as a split delivery. By default, the Forecaster module stops updating retain and runout times for the orders on a split delivery. It also sets the order’s adjustment status to Locked.

Use this setting to have the Forecaster continue updating retain and runout times for orders on split deliveries when the order status is Available, Planned, and/or Dispatched.

Options

  • Blank, that is, no entry (default)
    The Forecaster stops updating retain and runout times for orders on split deliveries when the order status is Available, Planned, and Dispatched.

  • AVL
    The Forecaster continues updating retain and runout times for orders on split deliveries when the order status is Available.

  • PLN
    The Forecaster continues updating retain and runout times for orders on split deliveries when the order status is Planned.

  • DSP
    The Forecaster continues updating retain and runout times for orders on split deliveries when the order status is Dispatched.

Additional Notes

If you want, you can have the Forecaster update retain and runout times when the orders on split deliveries have different statuses. To do so, enter the options in a comma-separated list.

[InventoryService]TankReadingOrderAdjustment

Applies to

Fuel Dispatch; Inventory Services; Forecaster

Description

By default, the Forecaster monitors tank readings and pending orders for stores that are set up to be forecasted. If it detects discrepancies in a store’s tank readings and deliveries, it automatically adjusts the order stores having their Inventory Service Mode set to Forecast. This setting allows you to disable this feature.

Notes:

  1. You identify a store as being forecasted in its company tank profile, which is set up in the Inventory Services module.

  2. The automatic adjustments the Forecaster makes are made only in its memory. Changes are not recorded in the database. Therefore, only orders created by the Forecaster are subject to adjustments. It does not adjust orders that are manually entered in the Fuel Dispatch Call On Demand Order Entry window.

Options

  • Y (default)
    The Forecaster will make adjustments automatically to orders it creates for stores that are forecasted.

    Notes:

    1. When reviewing stores' tank readings and future orders in Fuel Dispatch’s Forecast Order Review window, you can filter the retrieved stores to those having adjustments made by the Forecaster.

    2. When you use this option, you can identify stores that should be excluded from adjustments using the TankReadingOrderAdjustmentExcludeCompanies setting.

  • N
    The Forecaster will not automatically adjust projected orders for stores that are forecasted.

    Note: When you use this option, you can identify stores that should have adjustments made automatically using the TankReadingOrderAdjustmentOverrideCompanies setting.

Additional Notes

Inventory Services, Fuel Dispatch, and the Forecaster are modules in TMW’s FuelTMS suite of applications. For more information, contact TMW Sales.

[InventoryService]TieStrapReadingsToDips

Applies to

Fuel Dispatch

Description

For oil field clients, this setting allows the system to calculate the quantity of product in the tanks using the strapping measurements recorded in a Tank Model with the gauge or meter readings.

Options

  • N (default)
    Do not use the strapping measurements in a Tank Model with the gauge or meter readings. Use barrels or gallons per inch with the gauge or meter readings.

  • Y
    Use the strapping measurements in a Tank Model with the gauge or meter readings to calculate the quantity of product in the tanks.

Additional Notes

Inventory Services does not support this setting.

[Invoice] settings

[Invoice]FreeStopOffsPerOrder

Applies to

TMWSuite: 2002 and later, Fuel Dispatch, TMW.Suite

Description

This setting specifies the number of billable stops on an order that are not counted for stop charges.

Options

  • 2 (default)
    The default is 2, since most companies do not charge for the first pickup and the last drop.

  • User-defined number of free stops

[Invoice]StopOffEvents

Applies to

TMWSuite: 2002 and later, Fuel Dispatch, TMW.Suite

Description

This setting specifies the billable stop types that are counted when stop charges are calculated.

Options

  • DUL,LUL,DRL,DLD,LLD,HPL,PUL,PLD (default)

  • Comma-delimited list containing any of the following billable event codes:

    • DUL
      Driver Unload

    • LUL
      Live Unload

    • DRL
      Drop Loaded

    • DLD
      Driver Load

    • LLD
      Live Load

    • HPL
      Hook Preloaded Trailer

    • PUL
      Post Unload

    • PLD
      Preload

[MileageInterface] settings

[MileageInterface]DefaultMPH

Applies to

TMWSuite, Fuel Dispatch, TMW Operations

Description

This setting is used to calculate the amount of time needed to travel from point to point, based on an average number of miles per hour. Using the default setting of 45, if the distance between pickup and delivery is 90 miles, the estimated travel time, without an interim stop, would be two hours (90 miles divided by 45 mph = 2 hours).

Options

  • 45 (default)
    Specifies the speed 45 mph as the speed to be used in calculating the ETA.

  • User-defined miles per hour
    Make your entry as a whole number.

  • 0
    Turns off the ETA calculation.

Additional Notes

The MileageDateTime=Yes setting in the [Operations] section of the TTS50.ini file is required to have the system automatically calculate ETA.

[MileageInterface]HazardousMiles

Applies to

TMWSuite, Fuel Dispatch

Description

This setting determines whether the Hazardous drop-down field is available in the Mileage Information window and the Route Mileage Lookup window. When the Hazardous drop-down field is available, you can manually run hazardous mileage lookups.

Note: These windows are available in any base TMWSuite application by selecting Tools > Mileage Inquiry or Tools > Route Mileage Inquiry.

Options

  • N (default)
    The Hazardous drop-down field is not available.

  • Y
    The Hazardous drop-down field is available.

    Notes:

    1. In versions earlier than V.2014.13_07.0242, this setting was valid only if the String1 value of the DistanceLookupVersion General Info Table setting was OLD. Starting with version 2014.13_07.0242, the 2004 value is also supported.

    2. The options available in the Hazardous field are system codes established in the ALKHazLevel label in the System Administration application. They correspond to PC*MILER’s Hazardous Routing Options. The values in the Abbr column are entered as required by ALK and cannot be changed.

    3. This feature requires you to have ALK’s HazMat add-on module and either PC*MILER or PC*MILER|Streets.

[MileageInterface]HazMatLookupMode

Applies to

TMWSuite, Fuel Dispatch

Description

This setting tells the system how to determine the hazard level for a commodity, which will affect the routing and the mileage for the order on which the commodity is recorded.

Note: This setting is applicable only when the system is set up to use ALK’s hazardous routing options, i.e., the HazMatMileageLookups setting in the General Info Table has a value of Y in the String1 field.

Options

  • FgtClass (default)
    The system will use the commodity class recorded in the Fgt Class field in the commodity’s profile to determine its hazard level.

    Note: Commodity classes are set up in the Add/Maintain Commodity Class window in Commodity File Maintenance. To identify the hazardous level for a commodity class, make the appropriate selection in the class’s ALKHazLevel field.

  • CmdHazClass
    The system will use the hazardous class recorded in the Haz Class field in the commodity’s profile to determine its hazard level.

    Note: Hazardous classes are set up in the CmdHazClass label, accessed in System Administration. The hazardous level for a hazardous class is identified by linking the class’s entry in the CmdHazClass label with the appropriate entry in the ALKHazLevel label. Links are made by recording the value in the Abbr column of an ALKHazLevel label entry in the ExtraString1 column of a CmdHazClass label entry.

[MileageType]Billing

Applies to

TMWSuite, Fuel Dispatch

Description

This setting specifies the number identifying the mileage interface to be used by the Invoicing module. To specify the appropriate mileage interface for the Order Entry and Invoicing modules, first check the [MileageInterface] section.

For example, if you plan to use Rand Shortest, look for the XFACE setting that represents Rand Shortest. Note the number in brackets, and enter that number for the Billing setting, such as, Billing=1.

Options

3 (default)

[Misc] settings

[Misc]AllowReferenceNumberSequenceChangeByKeyStroke

Applies to

Fuel Dispatch, TMW Operations

Description

Your entry for this setting determines the action a user can take to change the sequence of multiple reference numbers. The default is to use the mouse to drag and drop the reference numbers to the desired location in the list. The reference number with a Seq # of 1 displays on the order header without any additional user action, that is, selecting the Ref button to open the reference numbers grid.

Options

  • N (default)
    Use the mouse to change the sequence of multiple reference numbers by dragging and dropping.

  • Y
    Use the keyboard to change the sequence of multiple reference numbers by editing the sequence number.

Additional Notes

  1. To change the sequence number using the keyboard, press TAB or ENTER.

  2. To exit the reference number grid using the keyboard, press ESC.

[Misc]CancelLogReasonRequired

Applies to

TMWSuite: 2014.13_07.0644, Fuel Dispatch

Description

When canceling an order in TMWSuite or Fuel Dispatch, you can record a cancellation reason.

This setting determines whether an entry is required in the Reason field.

Options

  • N (default)
    Entry is not required.

  • Y
    Entry is required.

    Notes:

    1. If you try to exit the log window without making an entry in the Reason field, the system displays this message, You must enter a reason for cancelling.

    2. The options for the Reason field are set up in the CancelReasonCode label.

    3. In TMWSuite, this setting is applicable only when you have [Misc]LogOrderCancel=Yes in your TTS50.

    4. If you want the Reason column to appear on the Cancelled Orders Log report in TMWSuite, set [Misc]CanceledOrdersLogVersion=01 in your TTS50. To include a report in Fuel Dispatch, add a link using Quick Designer and connect it to an SSRS report; you do not need a separate setting in Fuel Dispatch.

    5. This setting functions independently from the [Misc]CancelLogEntryRequired setting in your TTS50 that allows you to require an entry in either the Requested By or Remark fields on the log window.

[Misc]ClickToCallInstalled

Applies to

TMWSuite, CRM Right, Fuel Dispatch, Inventory Services, TMW Operations

Description

Use this setting to activate the Cisco Click to Call application, which allows users to automatically call co-workers, business partners, and customers from their computer without entering telephone numbers.

Options

  • F (default)
    Do not activate the Click to Call application.

    Note: Fields that display a phone number will not display the telephone icon.

  • T
    The Click to Call application has been installed and is activated.

    Notes:

    You must have the [TmwSuiteAddins]EnableInterface=Y in your TTS50.

    You must use the [Misc]ClickToCallPath setting in your TTS50 to indicate the path to the Click to Call application’s executable file.

    Fields that display a phone number will display the telephone icon.

Additional Notes

Click to Call requires that you are using the Cisco® Unified Communications Manager call-processing system.

[Misc]CaseSensitivePasswords

Applies to

TMWSuite

Description

This setting controls whether the system treats login passwords as case sensitive.

Note: This setting no longer applies to these applications:

  • TMW Operations, starting with 17.50

  • TMW Back Office, starting with 17.50

  • CRMRight, starting with 17.50

  • Fuel Dispatch, starting with 17.20

  • Inventory Services, starting with 17.20

  • eManifest, starting with 17.50

Starting with these versions, passwords that were created without case sensitivity must always be entered in upper case.

Options

  • OFF (default)
    System stores password as all upper case.

    Notes:

    1. Although the system default is still OFF, TMW has opted to change the value in the installed TTS50 file to ON. If the setting is not present in your INI file, the system default of OFF will apply.

    2. When you use this option, you can log on to TMWSuite by typing your password in mixed case. The system accepts and processes the password as being entered in upper case.

    3. When using a TMW application password to log on to Microsoft SQL Server 2005 and later, you must type your password in upper case. Press the SHIFT key to do this.

    4. If you create a password using this option, but later switch to the ON option, you must type your password in upper case. Use the SHIFT key to do this. This applies to TMWSuite and Microsoft SQL Server 2005 (and later).

  • ON
    System stores the password as it was entered.

    Notes:

    1. When logging on to TMWSuite or Microsoft SQL Server 2005 (and later) using a TMW application password, you must use the case sensitive password.

    2. Passwords created using this option, will not work if either of these occur. If they do, contact your system administrator.

      • The setting is switched to the OFF option.

      • The setting is removed from your TTS50.

Additional Notes

If the system is set up to use Microsoft SQL Server standards for password complexity, passwords must contain at least one letter, one number, and one non-alphanumeric character, such as an exclamation point. The password must not contain your entire account name or display name.

[Misc]ClickToCallPath

Applies to

TMWSuite, CRM Right, Fuel Dispatch, Inventory Services, TMW Operations

Description

Use this setting to indicate the path to the Click to Call application’s executable file on the user’s computer.

Options

  • C:\Program Files\Cisco Systems\Click to Call (default)
    Notes:

    1. This path is assigned by default during Click to Call installation.

    2. If you installed Click to Call in a different folder, enter the complete and correct path here.

Additional Notes

Click to Call requires that you are using the Cisco® Unified Communications Manager call-processing system.

[Misc]CompanyProductsRule

Applies to

TMWSuite 2003.03_03.0226, Fuel Dispatch 15.10.16.0, TMW Operations 2019.1

Description

When you record commodity sub codes, this setting allows you to specify this information for each sub code:

  • Valid pickup locations

  • Valid delivery locations

  • Suppliers

  • Trip dates

Each sub code can be handled by only those locations during the specified date ranges.

You record commodity sub codes in:

  • TMWSuite’s File Maintenance application

  • TMW Operations' Commodity Profile window, on the Sub Codes tab

See the Additional Notes for information about recording sub code restrictions.

  • TMWSuite
    When you save an order that includes a commodity sub code, this setting determines which location and date information is verified. For orders that do not meet the requirements, the system either issues a warning or prevents the order from being saved. This setting applies to orders created in Order Entry and the Dispatch Trip Folder.

  • Fuel Dispatch
    This setting is used with the Auto-fill Autoloading method in Fuel Dispatch. It tells the Trailer Autoload window to use the density recorded for the commodity sub code instead of the density of the generic commodity.

    The setting options determine how the system behaves when an order includes a commodity sub code. If a match exists for the sub code, its density is used in the Trailer Autoload window to calculate weights. If no match exists, the generic commodity’s density is used.

    See the Additional Notes for information about other required settings.

  • TMW Operations
    When you save an order that includes a commodity sub code, this setting determines which location and date information is verified. For orders that do not meet the requirements, the system either issues a warning or prevents the order from being saved. This setting applies to orders created in Order Maintenance or the Trip Folder.

    This setting was available starting with versions 2019.1 through 2019.3, but functionality was limited to options provided in File Maintenance.

Options

  • None (default)

    • TMWSuite and TMW Operations
      No location or date checking is performed. Any pickup or delivery locations set up for the commodity sub code are ignored.

    • Fuel Dispatch
      The commodity density for the generic (unblended) commodity is used in the Trailer Autoload window.

  • WARNPUP
    When you save an order, the system checks the validity of the pickup from the shipper on the pickup date. If a sub code cannot be matched to the pickup location, a warning appears. The order is saved.

  • WARNDRP
    When you save an order, the system checks the validity of the drop at the consignee on the delivery date. If a sub code cannot be matched to the drop location, a warning appears. The order is saved.

  • WARNPUPDRP
    When you save an order, the system performs both the WARNPUP and WARNDRP checks. See those option descriptions for details. The order is saved.

  • ENFORCEPUP
    When you save an order, the system performs the checks described for the WARNPUP option. You cannot save the order.

  • ENFORCEDRP
    When you save an order, the system performs the checks described for the WARNDRP option. You cannot save the order.

  • ENFORCEPUPDRP
    When you save an order, the system performs both the ENFORCEPUP and ENFORCEDRP checks. See those option The order cannot be saved.

Additional Notes

  • TMWSuite
    Any option other than None adds menu commands that let you set up company product rules.

    The Edit > Pickup Locations and Edit > Delivery Locations commands are added in Commodity File Maintenance.

    The Edit > Products That May Be Shipped and Edit > Products That May Be Delivered commands are added in Company File Maintenance:

    If a shipper or consignee has not been specified as a pickup or delivery location for a commodity sub code, it is assumed that no restrictions apply for that company. No commodity check is performed for that company.

    If multiple products may be picked up and delivered for the dates on the order, a window displays the duplicate matches and lets you select one for the trip.

  • Fuel Dispatch
    To use the [Misc]CompanyProductsRule setting with the Auto-fill Autoloading feature in Fuel Dispatch, these settings are required:

    • In your TTS50:

      • [FuelDispatch]AutoloadMethod=2, 3, or 4

      • [FuelDispatch]DisplayAutoload=Y

      • [Misc]MaintainCommoditySubCodes=Y

    • In your General Info Table:

      • TrlConfigurationMgtOn must have Y in the String1 field.

      • JurisdictionLicense must have Y in the String1 field.

      • DistanceLookupVersion must have 2004 in the String1 field.

      • DistanceCacheByState must have Y in the String1 field.

      • DistanceCacheOneWay must have Y in the String1 field.

  • TMW Operations
    Any option other than None adds the Tools Maintenance > Company Product Maintenance menu command to the Tools menu. It opens the Company Product Maintenance window. Use this window to set up valid location and date range information for commodity sub codes.

[Misc]DriverLogDurationForPFM

Applies to

TMW.Suite Operations 2017.10

Description

This setting specifies the number of days of PeopleNet Fleet Manager eDriver Logs data to be displayed.

Note: This setting requires that you have [Misc]ValidDriverLogDurationValuesForPFM=1,7,8,14,15 in your TTS50.

Options

  • 7 (default)
    Show log data for today and the previous six days.

  • 1
    Show log data for today.

  • 8
    Show log data for today and the previous seven days.

  • 14
    Show log data for today and the previous 13 days.

  • 15
    Show log data for today and the previous 14 days.

[Misc]EnforceValidParentCmpID

Applies to

TMWSuite: 2002 and later, Fuel Dispatch

Description

This setting determines whether the drop-down list for parent companies is restricted only to IDs for parents. These fields are affected:

  • DivOf/Parent field on the Company File Maintenance screen in File Maintenance.

  • Divis. Of/Parent field on rate indexes in Rate Schedules.

  • Div of Parent field in the .NET version of the company profile.

Options

  • N (default)
    Do not restrict the drop-down list.

  • Y
    Restrict the drop-down list to IDs of companies designated as parents.

[Misc]ExpDate

Applies to

TMWSuite, V.2003 and later; Fuel Dispatch

Description

When an expiration is created, it is given a start date, that is the day it goes into effect. This setting determines how many days before that date the Priority 1 and Priority 2 warning indicators will turn from green to yellow.

In TMWSuite, the P1 and P2 indicators display in the:

  • Trip Folder

  • Asset Assignment window

  • Tractor/Trip Segment tab in the Planning Worksheet

    The P1 and P2 indicators on the Tractor/Trip Segment tab are controlled by the ExpDate= setting for all resource expirations. The DrvExpDate= and TrlExpDate= settings in the [Misc] section are ignored.

    Trailer expirations will not affect the P1 and P2 indicators on the Tractor/Trip Segment tab when IncTrlFilterQual=N is in the [Dispatch] section of the TTS50.ini file.

  • Driver tab in the Planning Worksheet

    The P1 and P2 indicators on the Driver tab are controlled by the ExpDate= setting only when the DrvExpDate= setting is blank.

  • Trailer tab in the Planning Worksheet

    The P1 and P2 indicators on the Trailer tab are controlled by ExpDate= setting only when the DrvExpDate= setting is blank.

  • Assign Driver/Equipment window in Order Entry

    The indicator lights are named Hold (P1) and Warn/Note (P2)

  • This setting is not applicable in the Dispatch application’s Dispatch Advantage module. Dispatch Advantage’sTrip Assignment grid does not display P1 or P2 indicators. Before version 2010.09_08.0575, Dispatch Advantage was a standalone, separately licensed application. Starting with version 2010.09_08.0575, Dispatch Advantage became part of the Dispatch application, and is accessible from the Planning Worksheet.

Note: In situations where resource(s) have multiple expirations, the color of the indicators reflects the condition that is most serious. For example, if a tractor has a yellow Priority 1 and a red Priority 1, the indicator displays red.

In Fuel Dispatch, the P1 and P2 indicators display in the:

  • Planning Worksheet

    The P1 and P2 indicators are shown in the Resource pane. They apply only to driver expirations. Indicators do not reflect the status of tractor or trailer expirations.

    By default, the indicators are controlled by the ExpDate= setting. If the DrvExpDate= setting in the [Misc] section has a value, that is, it is not left blank, it will control the changing of P1 and P2 indicator colors.

    The Driver, Tractor, Trailer, and Carrier tabs in the Trips/Resources pane do not display P1 and P2 indicators.

  • Card Planner

    The P1 and P2 indicators are shown in the Shift pane. They apply only to driver expirations. Indicators do not reflect the status of tractor or trailer expirations.

    By default, the indicators are controlled by the ExpDate= setting. If the DrvExpDate= setting in the [Misc] section has a value, that is, it is not left blank, it will control the changing of P1 and P2 indicator colors.

    The Driver, Tractor, Trailer, and Carrier tabs in the Trips/Resources pane do not display P1 and P2 indicators.

Options

  • 14 (default)
    The Priority 1 and Priority 2 warning indicators will turn from green to yellow 14 days before an expiration’s start date.

[Misc]GlobalLogon

Applies to

TMWSuite, CRM Right, Fuel Dispatch, TMW Operations, TMW Back Office

Description

This setting activates the global logon feature.

Options

  • Yes (default)
    Store the current user ID and password and apply it for each TMW application accessed by the user today or until he/she selects the Exit and Sign Off command from the File menu to close an application.

    Notes:

    1. This option requires entry of an ID and password only once a day. Entry is needed the first time the user accesses a TMW application. When subsequent access to an application is needed, the system bypasses the logon screen and immediately opens the application. The user may re-access the same application, or access different applications, during the same day without having to log on each time.

    2. CRM Right does not have an Exit and Sign Off command.

      • If users have accessed the application from within TMW Operations, they must use the File > Exit and Sign Off command in TMW Operations.

      • When used as a standalone product, CRM Right does not allow users to exit and sign off. Once a user accesses CRM Right, the system will bypass the logon screen until the stored user ID and password expire at the end of the day.

  • No
    Require the user to log on every time an application is started.

Additional Notes

TMW eManifest does not support this setting.

[Misc]Graceperiod

Applies to

TMWSuite: V.2003 and later; Fuel Dispatch; TMW Operations

Description

Grace period refers to the number of days the system is to continue showing inactive companies and carriers; and terminated tractors, trailers, and drivers in drop-down lists. This setting specifies the number of days allowed. It affects:

  • Drop-down lists in Order Entry, Dispatch, Invoicing, and Settlements.

  • The GRACE setting in the General Info Table.

You can override the grace period temporarily. You do this by selecting the Show Retired Items check box in the Set List Box Properties window. To access the window, go to Tools > Set List Box Property in any core TMWSuite application. The check box is cleared by default.

When the Show Retired Items check box is cleared:

  • This setting in your TTS50 determines the number of days allowed.

  • The General Info Table GRACE setting:

    • Has String1 set to GracePeriod. This indicates that the system uses this setting.

    • The number in the Int1 field matches the number of days specified by this setting.

When the Show Retired Items check box is selected:

  • This setting is not used.

  • The General Info Table GRACE setting values are updated automatically.

    • String1 is set to Apocalypse. Users in any base application can select IDs of inactive companies and carriers, and terminated drivers, tractors, and trailers in fields that use a drop-down list.

    • The Int1 field is set to 999. This is the number of days allowed.

Selecting the Show Retired Items check box does not change this setting’s values in your TTS50. The original entry is retained. Clearing the check box resets the grace period. The system reads the entry for this setting and writes that entry in the Int1 field of the GRACE General Info Table setting.

This setting does not control the ability to look up retired companies or resources in the scroll windows. Resource (driver, tractor, trailer, and carrier) scroll windows let you include retired resources on a search-by-search basis. When using the company scroll window, clearing the Active check box will retrieve retired companies.

Options

  • 90 (default)
    Inactive companies and carriers, and terminated resources show in drop-down lists for 90 days.

  • User-specified number of days
    Inactive companies and carriers, and terminated resources show in drop-down lists for the number of days you enter.

Additonal Notes

  1. If the General Info Table GRACE setting has GracePeriod in String1, TMW Operations will only use the [Misc]GracePeriod TTS50 values.

  2. It’s recommended that the [Misc]GracePeriod TTS50 setting value and the GRACE General Info Table values be kept in sync for TMWSuite.

[Misc]MaintainCommoditySubcodes

Applies to

TMWSuite 2003.03_03.0226, Fuel Dispatch 15.10.16.0, TMW Operations 2019.2

Description

Depending on the time of year, gas stations alternate between providing seasonal blends of summer-grade fuel and winter-grade fuel. You use the Maintain Commodity Subcodes window to record a sub code for each seasonal blend of a commodity. The window is not available by default. Use this setting to provide access to it from a commodity’s profile.

Note: The window is available in the File Maintenance and TMW Operation applications.

Options

  • N (default)
    In TMWSuite and Fuel Dispatch, hide the Edit > Commodity Sub Codes menu command.

    In TMW Operations, hide the Sub Codes tab on the Commodity Profile window.

  • Y

    • In TMWSuite and Fuel Dispatch, show the Edit > Commodity Sub Codes menu command.

      Note: When you record commodity sub codes in File Maintenance, the [Misc]CompanyProductsRule setting in your TTS50 allows you to specify the valid pickup locations, delivery locations, suppliers, and trip dates for each sub code.

    • In TMW Operations, display the Sub Codes tab on the Commodity Profile window.

      Note: When you record commodity sub codes on the Sub Codes tab in TMW Operations, the [Misc]CompanyProductsRule setting in your TTS50 allows you to specify the valid pickup locations, delivery locations, suppliers, and trip dates for each sub code.

[Misc]OrderScrollDaysBack

Applies to

TMWSuite: 2000, CRM Right, Fuel Dispatch, Inventory Services, TMW eManifest, TMW Operations

Description

This setting affects the Start From and Delivery From dates on the Scroll Orders window. Enter the number of days prior to today that you want the From dates set back, such 60 or 90.

Options

  • 30 (default)
    Set the From dates to 30 days prior to today’s date.

  • User-defined number of days
    Enter the number of days prior to today that you want the From dates set back.

  • BeginningOfTime
    Set the From dates to 01/01/50.

Additional Notes

In TMWSuite, the [Misc]MaxOrderScrollDays setting specifies the max number of days for which the system will search for orders. If the date range resulting from this setting exceeds the specified limit, the system will behave as defined by the [Misc]MaxOrderScrollExceededActions setting.

[Misc]RecordLocking

Applies to

TMWSuite; Fuel Dispatch; Forecaster; TMW Operations

Description

This setting determines whether users will be prevented from editing an order when another user has already opened it. If enabled, this restriction will apply regardless of whether the order is open in the same application, or in a different application that supports record locking.

If the order has been combined with other orders onto a consolidated trip, the record lock is enforced for all orders on the movement.

Options

  • N (default)
    Record locking is disabled.

  • Y
    Record locking is enabled.

    Only one user at a time can modify an order. During the record lock timeout period, the order becomes read-only for other users.

    Note: Use the RecordLockTimeout setting to identify the number of minutes before a record lock expires.

Additional Notes

  1. With Fuel Dispatch and TMW Operations, system administrators and supervisors can update these record lock timeout settings from within the application:

    • RecordLockTimeout

    • RecordLockTimeoutWarn

    • RecordLockRefreshTimer

  2. If you are using the Fuel TMS Forecaster module, record locking can affect the Forecaster’s Auto Adjustment feature. The Forecaster cannot adjust an order that is locked because a user has it opened. For more information on the Forecaster and Fuel TMS, contact TMW Sales.

[Misc]RecordLockRefreshTimer

Applies to

Fuel Dispatch; Forecaster; TMW Operations

Description

This setting specifies the number of seconds between system checks of the database to determine whether an order is locked. To maximize system performance, avoid setting short refresh intervals, especially where there are many users, since many orders could become locked at once.

Note: This setting applies only if [Misc]RecordLocking=Y in your TTS50.ini file.

Options

  • 30 (default)
    The system will check the database every 30 seconds to determine whether an order is locked.

  • User defined number of seconds
    Enter a whole number, representing the number of seconds the system will wait to check the database to determine whether an order is locked.

Additional Notes

With Fuel Dispatch and TMW Operations, system administrators and supervisors can update these record lock timeout settings from within the application:

  • RecordLockTimeout

  • RecordLockTimeoutWarn

  • RecordLockRefreshTimer

[Misc]RecordLockTimeout

Applies to

TMWSuite; Fuel Dispatch; Forecaster; TMW Operations

Description

This setting specifies the number of minutes before a record lock expires, allowing another user in the same application, or in a different application that supports record locking to edit the same order.

Note: This setting applies only if [Misc]RecordLocking=Y in your TTS50.ini file.

Options

  • 5 (default)
    A record lock will expire after five minutes.

  • User defined number of minutes
    Enter a whole number, representing the number of minutes before a record lock expires.

Additional Notes

With Fuel Dispatch and TMW Operations, system administrators and supervisors can update these record lock timeout settings from within the application:

  • RecordLockTimeout

  • RecordLockTimeoutWarn

  • RecordLockRefreshTimer

[Misc]RecordLockTimeOutWarn

Applies to

Fuel Dispatch; Forecaster; TMW Operations

Description

This setting specifies the number of minutes before the system warns that a record lock is about to expire. It should be less than the setting for the value specified by the RecordLockTimeout setting.

Note: This setting applies only if [Misc]RecordLocking=Y in your TTS50.ini file.

Options

  • 4 (default)
    The system warns that a record lock is to expire in four minutes.

  • User defined number of minutes
    Enter a whole number, representing the number of minutes before the system warns that a record lock is about to expire.

Additional Notes

With Fuel Dispatch and TMW Operations, system administrators and supervisors can update these record lock timeout settings from within the application:

  • RecordLockTimeout

  • RecordLockTimeoutWarn

  • RecordLockRefreshTimer

[Misc]RemoveScrollExportToExcelMenuOption

Applies to

CRM Right, Fuel Dispatch, Inventory Services, TMW eManifest, TMW Back Office, TMW Operations

Description

When you right-click on retrieved records in a .NET scroll window, a shortcut menu appears. This setting determines whether the Export to Excel command is available in that shortcut menu.

Options

  • N (default)
    Display the Export to Excel command for all users.

    Note: When you have [Misc]RemoveExportToExcelMenuOptionFromAllGrids=Y, this setting is ignored.

  • Y
    Do not display the Export to Excel command for any users, including system administrators and supervisors.

Additional Notes

  1. For Fuel Dispatch and Inventory Services, this setting is functional only if [Misc]UseNewScrolls=Y in your TTS50.

  2. For CRM Right, this setting also affects the Company List and Carrier List retrieval grids.

[Misc]RemoveScrollPrintMenuOption

Applies to

CRM Right, Fuel Dispatch, Inventory Services, TMW eManifest, TMW Operations, TMW Back Office

Description

When you retrieve data in .NET scroll windows, this setting determines whether you will be able to see the Print > All Rows, Print > Selected Rows, and Print > Print Preview commands in the shortcut menu that displays when you right-click in the data grid area. This setting can be used to help ensure the confidentiality of your data.

Options

  • N (default)
    Display the Print commands for all users.

  • Y
    Do not display the Print commands for all users, including system administrators and supervisors.

Additional Notes

  1. For Fuel Dispatch and Inventory Services, this setting is functional only if [Misc]UseNewScrolls=Y in your TTS50.ini file.

  2. For CRM Right, this setting also affects the Company List and Carrier List retrieval grids.

[Misc]SaveMenuWithFormLayout

Applies to

Fuel Dispatch; Inventory Services; TMW Operations

Description

This setting applies to customizing window and menu layouts.

By default, you can include the menu layout when you save changes to a window layout. Once the menu layout is saved with the window layout, this setting also allows you to reset the menu back to the window’s factory default layout, while keeping the window layout as designed.

Options

  • Y (default)
    A customized menu layout is automatically included when the window layout is saved.

    Note: While customizing the menus and windows for the application, you can temporarily disable this feature by selecting Toggle Include Current Menu With Screen Layout from the shortcut menu. The green check before the option is cleared.

  • N
    Feature is disabled. You cannot include a menu layout when saving the form window layout.

[Misc]ShowResetLayoutForNonSA

Applies to

TMWSuite Add-ins, CRM Right, Fuel Dispatch, Inventory Services, TMW Back Office, TMW eManifest, TMW Operations

Description

TMW customers apply security to windows and grids by hiding some columns and fields, and by making others read-only. However, by default, any user can switch from a customized window or data grid layout back to the system default by right-clicking on the layout and selecting Reset Layout from the shortcut menu. This can be problematic because the system default has no security applied to it. As a result, users will be able to view or make entries in fields or columns that your company wants to be hidden or read-only.

You can use the ShowResetLayoutForNonSA INI setting to hide the Reset Layout menu selection for users who are not system administrators.

Options

  • Y (default)
    Show the Reset Layout menu option for users who are not system administrators.

  • N
    Do not show the Reset Layout menu option for users who are not system administrators.

[Misc]UseNewScrolls

Applies to

Fuel Dispatch: 2.103.31 and Inventory Services

Description

This setting determines whether Fuel Dispatch will display the version of the scroll windows that shipped with builds prior to 2.103.31, or the enhanced version of the scroll windows.

Options

  • N (default)
    Do not activate the enhanced version of the scroll windows.

  • Y
    Use the enhanced version.

[Misc]UseWindowsAuthentication

Applies to

TMWSuite, CRM Right, TMW.Suite Back Office, TMW.Suite Operations, Fuel Dispatch, Inventory Services

Description

This setting determines whether the system uses Windows Authentication to log in to TMW applications.

Options

  • N (default)
    Do not use Windows Authentication. Use TMWSuite User ID and Password to log in.

  • Y
    Use Windows Authentication.

    Notes:

    1. When you use this option, the [Misc]GlobalLogon setting in the section of the TTS50.ini file is ignored.

    2. To log in to TMWSuite with Windows Authentication successfully, you must first record the user’s Windows login (network login) in the following places:

      • The Windows Login field in the user’s profile
        You must enter the login information using the DOMAIN\User format. For example: tmwsystems\jsing.

      • The Logins folder on your SQL server that houses your TMWSuite database
        You must enter the login information using the DOMAIN\User format. For example: tmwsystems\jsing.

      • The [INIPATH] section of the TTS50.ini file, in the form User Login=Path to local INI file

        Your TTSlocal.ini file specifies the TMWSuite database to use and the Microsoft SQL server on which the database resides.

        If you have only one database and the TTSlocal.ini file is located in the same directory as the TMWSuite executables, you do not need to make any [INIPATH] entries in the TTS50.ini file. TMWSuite will automatically look in the TTSlocal.ini for the database location.

[Misc]ValidDriverLogDurationValuesForPFM

Applies to

TMW.Suite Operations 2017.10

Description

This setting identifies the possible values that can be recorded for the [Misc]DriverLogDurationForPFM setting.

Options

  • 1,7,8,14,15 (default)
    PeopleNet Fleet Manager accepts only these values. You cannot leave the setting blank or specify other values.

[Order] settings

[Order]CopyAccessorials

Applies to

TMWSuite, Fuel Dispatch, TMW Operations, CRM Right

Description

When copying an order, this setting determines whether the option to copy accessorials will be selected automatically in:

  • Order Entry Copy window.

  • Call On Demand Order Entry Copy window in Fuel Dispatch.

  • Copy Options dialog box used to copy orders in the Dispatch Trip Folder.

Options

  • No (default)
    The Accessorials check box is not selected by default.

  • Yes
    The Accessorials check box is selected by default.

Additional Notes

This setting also pertains to the TMW Ticket Order Entry add-on module. CopyOrderRefNbrs is one of the INI settings Ticket Order Entry checks to determine which data is to be copied from the master order to the orders created from tickets. The Ticket Order Entry module requires special licensing. For more information, consult your TMW Sales Representative.

[Order]CopyAssets

Applies to

TMWSuite, Fuel Dispatch, TMW Operations, CRM Right

Description

When copying an order, this setting determines whether the option to copy assets will be selected automatically in the following check boxes:

  • Copy Asset Assignments check box in the Order Entry Copy window.

  • Copy Assets check box in the Call On Demand Order Entry Copy window in Fuel Dispatch.

    Note: The system will automatically set the trip to Available if no resources are specified in the Copy Assets section of the window. If resources are specified, the system automatically sets the field to Planned.

  • Asset Assignments check box in the Copy Options dialog box used to copy orders in the Trip Folder.

Options

  • No (default)
    The check box is not selected by default.

  • Yes
    The check box is selected by default.

Additional Notes

  1. When copying a master order in the Order Entry Copy window or the Trip Folder Copy Options dialog box, the Copy Asset Assignments or Asset Assignments check boxes are not selected, regardless of the option used with this setting. By definition, master orders are templates; resources cannot be assigned to them.

  2. If CopyAssets=No and CopyStatus=Yes:

    • In Order Entry, copying an order with assets assigned and a status of Planned will result in a copy with the same assets assigned and a Planned status. Any other status on the original order will result in a copy with a status of Available.

    • In the Trip Folder, if resources have been assigned to the original order, the system will not assign those resources to the copy. The status is set to Available.

  3. If CopyAssets=Yes and CopyStatus=No:

    • In Order Entry, you cannot copy an order with assets assigned and a status of Planned. When the Copy window opens, the status is set to Available. You must set the status to Planned and then select the Copy Asset Assignments check box to copy the assets and Planned status to the new order.

    • In the Trip Folder, you cannot copy an order with assets assigned and a status of Planned. You must manually set the status to Planned and then select the Asset Assignments check box to copy the assets and Planned status to the new order.

[Order]CopyDates

Applies to

TMWSuite, Fuel Dispatch, TMW Operations, CRM Right

Description

When copying an order, this setting determines whether the option to copy dates will be selected automatically in:

  • Copy Dates check box in the Copy window in Order Entry.

  • Copy Dates check box in the Call On Demand Order Entry Copy window in Fuel Dispatch.

  • Dates check box in the Copy Options dialog box used to copy orders in the Dispatch Trip Folder.

Options

  • Yes (default)
    The check box is selected by default.

  • No
    The check box is not selected by default.

[Order]CopyLoadRequirements

Applies to

TMWSuite, Fuel Dispatch, TMW Operations, CRM Right

Description

When copying an order, this setting determines whether the option to copy load requirements will be selected automatically in:

  • The Load Requirements check box in the Order Entry Copy window.

  • The Copy Load Requirements check box in the Call On Demand Order Entry Copy window in Fuel Dispatch.

  • The Load Requirements check box in the Copy Options dialog box used to copy orders in the Dispatch Trip Folder.

Options

  • Yes (default)
    The check box is selected by default.

    Note: The Load Requirements check box must be selected for order-based load requirements to carry over to the order copy. Load requirements recorded for a company or a commodity listed on an order are always carried over when an order is copied.

  • No
    The check box is not selected by default.

[Order]CopyNotes

Applies to

TMWSuite, Fuel Dispatch, TMW Operations, CRM Right

Description

When copying an order, this setting determines whether the option to copy notes will be selected automatically in:

  • The Notes check box in the Order Entry Copy window.

  • The Copy Notes check box in the Call On Demand Order Entry Copy window in Fuel Dispatch.

  • The Notes check box in the Copy Options dialog box used to copy orders in the Dispatch Trip Folder.

Options

  • Yes (default)
    The check box is selected by default.

  • No
    The check box is not selected by default.

[Order]CopyOrderRefNbrs

Applies to

TMWSuite, Fuel Dispatch, TMW Operations, CRM Right

Description

When copying an order, this setting determines whether the option to copy reference numbers will be selected automatically in:

  • The Order Reference #'s check box in the Order Entry Copy window.

  • The Copy Order Ref Numbers check box in the Call On Demand Order Entry Copy window in Fuel Dispatch.

  • The Order Reference #'s check box in the Copy Options dialog box used to copy orders in the Dispatch Trip Folder.

Options

  • No (default)
    The check box is not selected by default.

  • Yes
    The check box is selected by default.

Additional Notes

This setting also pertains to the TMW Ticket Order Entry add-on module. CopyOrderRefNbrs is one of the INI settings Ticket Order Entry checks to determine which data is to be copied from the master order to the orders created from tickets. The Ticket Order Entry module requires special licensing. For more information, consult your TMW Sales Representative.

[Order]CopyOtherRefs

Applies to

TMWSuite, Fuel Dispatch, TMW Operations, CRM Right

Description

When copying an order, this setting determines whether the option to copy stop and commodity reference numbers will be selected automatically in:

  • The Other Reference #'s check box in the Order Entry Copy window.

  • The Copy Other Ref Numbers check box in the Call On Demand Order Entry Copy window in Fuel Dispatch.

  • The Other Reference #'s check box in the Copy Options dialog box used to copy orders in the Dispatch Trip Folder.

Options

  • Yes (default)
    The check box is selected by default.

  • No
    The check box is not selected by default.

[Order]CopyQuantities

Applies to

TMWSuite, Fuel Dispatch, TMW Operations, CRM Right

Description

When copying an order, this setting determines whether the option to copy quantities will be selected automatically in:

  • The Quantities check box in the Copy window in TMWSuite’s Order Entry.

  • The Copy Quantities check box in the Copy Order/Trip window in Fuel Dispatch.

    Note: This window is available in Call On Demand Order Entry and in Oil Field Order Entry.

  • The Copy Quantities check box in the Copy Order/Trip window in TMW Operations.

Options

  • Yes (default)
    The check box is selected by default.

  • No
    The check box is not selected by default.

Additional Notes

This setting does not affect TMWSuite’s Dispatch application. The quantities are automatically copied regardless of the option you use with this setting.

[Order]CopyPermitRequirements

Applies to

TMWSuite, Fuel Dispatch, CRM Right

Description

When copying an order in Order Entry, Dispatch, and Fuel Dispatch, this setting determines whether the option to copy non-system generated permit requirements will be selected automatically.

Note: This setting is applicable only if you are using the TMWSuite Permitting add-on module.

Options

  • No (default)
    The check box is not selected by default.

  • Yes
    The check box is selected by default.

Additional Notes

  1. In the Copy window in Order Entry and the Call On Demand Order Entry Copy window in Fuel Dispatch, the Copy Permit Requirements check box determines whether permit requirements on the original order will be copied to the new orders.

  2. In the Copy Options window in Dispatch, the Permit Requirements check box determines whether permit requirements on the original order will be copied to the new orders.

  3. Only permit requirements that were manually added to the original order can be copied to the new orders. The system cannot copy default permit requirements, i.e., permit requirements that were added by the system automatically. When the new orders are created, the system will determine which default permit requirements apply.

[Order]DefaultWgtVolCount

Applies to

TMWSuite, Fuel Dispatch, TMW Operations

Description

This setting allows you to change the default units of measure for weight, volume, and count to something more appropriate for your business.

Options

  • Blank, that is, no entry (default)
    The Weight, Volume, and Count fields on the order header default to LBS, GAL, and PCS (pounds, gallons, and pieces) respectively.

  • User-defined list
    The Weight, Volume, and Count fields on the order header display the specified unit values.

    Notes:

    1. Make entries in the following order: weight, volume, count.

    2. Each specified unit value must exactly match the ABBR field entry of the applicable unit of measure. as listed in the WeightUnits, VolumeUnits, and CountUnits labels. You access these labels in the System Administration application.

    3. You do not need to make an entry for each unit. For example, to change the default volume unit from Gallons to Oil Barrels and leave the other options as system defaults, you would enter: ,BBL,. If you omit any abbreviation you must enter the comma separators. The omitted unit of measure reverts to the matching default setting (LBS, GAL, or PCS).

[Order]EnableCopyNotesToOrder

Applies to

Fuel Dispatch, TMW Operations, TMW Back Office

Description

You can set up the system to allow copying company, commodity, or resource notes to an order. This lets you make changes to notes for profile entities to customize them for a specific order, without changing the profile itself.

This setting applies to notes for companies, commodities, carriers, drivers, tractors, and trailers.

Options

  • N (default)
    Do not allow users to copy notes from profiles to orders.

  • Y
    Allow users to copy notes from profiles to orders.

    • In Fuel Dispatch, enable the Copy to Order check boxes and the Copy to Order button in the Summary tab in the Notes window.

    • In TMW Operations, enable the Copy to Order link in the Notes tab in the Order Maintenance and Trip Folder windows.

    • In TMW Back Office, enable the Copy to Order link in the Notes tab in the Trip Settlements Folder and Edit Invoice Folder windows.

[Order]ForceRevType1

Applies to

TMWSuite, TMW Operations, Fuel Dispatch V.15.30.39

Description

This setting determines if the system will save an order with the RevType1 field set to UNKNOWN.

In TMWSuite, this setting is applicable in both Order Entry and the Trip Folder.

In TMW Operations, this setting is applicable in both Order Maintenance and the Trip Folder.

In Fuel Dispatch, this setting is applicable in Call On Demand Order Entry.

Options

  • N (default)
    The system will save an order with a RevType1 value of UNKNOWN.

  • Y
    The system will not save an order with a RevType1 value of UNKNOWN.

Additional Notes

This setting does not apply to master orders. For master orders, use the [Order]MasterForceRevType1 setting.

[Order]ForceRevType2

Applies to

TMWSuite, TMW Operations, Fuel Dispatch V.15.30.39

Description

This setting determines if the system will save an order with the RevType2 field set to UNKNOWN.

In TMWSuite, this setting is applicable in both Order Entry and the Trip Folder.

In TMW Operations, this setting is applicable in both Order Maintenance and the Trip Folder.

In Fuel Dispatch, this setting is applicable in Call On Demand Order Entry.

Options

  • N (default)
    The system will save an order with a RevType2 value of UNKNOWN.

  • Y
    The system will not save an order with a RevType2 value of UNKNOWN.

Additional Notes

This setting does not apply to master orders. For master orders, use the [Order]MasterForceRevType2 setting.

[Order]ForceRevType3

Applies to

TMWSuite, TMW Operations, Fuel Dispatch V.15.30.39

Description

This setting determines if the system will save an order with the RevType3 field set to UNKNOWN.

In TMWSuite, this setting is applicable in both Order Entry and the Trip Folder.

In TMW Operations, this setting is applicable in both Order Maintenance and the Trip Folder.

In Fuel Dispatch, this setting is applicable in Call On Demand Order Entry.

Options

  • N (default)
    The system will save an order with a RevType3 value of UNKNOWN.

  • Y
    The system will not save an order with a RevType3 value of UNKNOWN.

Additional Notes

This setting does not apply to master orders. For master orders, use the [Order]MasterForceRevType3 setting.

[Order]ForceRevType4

Applies to

TMWSuite, TMW Operations, Fuel Dispatch V.15.30.39

Description

This setting determines if the system will save an order with the RevType4 field set to UNKNOWN.

In TMWSuite, this setting is applicable in both Order Entry and the Trip Folder.

In TMW Operations, this setting is applicable in both Order Maintenance and the Trip Folder.

In Fuel Dispatch, this setting is applicable in Call On Demand Order Entry.

Options

  • N (default)
    The system will save an order with a RevType4 value of UNKNOWN.

  • Y
    The system will not save an order with a RevType4 value of UNKNOWN.

Additional Notes

This setting does not apply to master orders. For master orders, use the [Order]MasterForceRevType4 setting.

[Order]InitEarlyDrpDt

Applies to

Fuel Dispatch V16.10 and later

Description

Use this setting to specify the default earliest drop date and time when you create a new order in the Oil Field Order Entry window. Your entry must consists of two parameters (date and time). You separate them with a comma. Do not enter spaces before or after the comma.

Options

  • Blank, that is, no entry
    Apply the system default of 01/01/50, 00:00

  • User-defined parameters
    Your entry must consists of two parameters

    • Date

      Sets the earliest drop date, relative to the current date

      For example, 0 equals today, 1 equals tomorrow, 2 equals two days in the future, etc.

    • Time

      • 0 sets the earliest drop time to the current time. For example, an entry of 0,0 sets the earliest drop date/time to today and the time to now (time the order was entered in the system).

      • hh:mm sets the absolute time, in 24-hour format. For example, an entry of 1,13:30 sets the earliest drop date/time to tomorrow at 1:30 p.m.

      • mmm sets the time offset, in minutes, relative to the current time. For example, and entry of 0,60 sets the earliest drop date/time to today, one hour from the current time.

Additional Notes

  1. TMWSuite and TMW Operations do not support this setting.

  2. You can use these settings to change other default date/time settings.

    • [Order]InitEarlyPckUpDt

    • [Order]InitLatPckUpDt

    • [Order]InitLatDrpDt

[Order]InitEarlyPckUpDt

Applies to

TMWSuite, TMW Operations, Fuel Dispatch V16.10 and later

Description

Use this setting to specify the default earliest pickup date and time when you create a new order. Your entry must consists of two parameters (date and time). You separate them with a comma. Do not enter spaces before or after the comma.

Options

  • Blank, that is, no entry
    Apply the system default of 01/01/50, 00:00.

  • User-defined parameters
    Your entry must consists of two parameters:

    • Date
      Sets the earliest pickup date, relative to the current date

      For example, 0 equals today, 1 equals tomorrow, 2 equals two days in the future, etc.

    • Time
      Sets the earliest pickup time on the specified date

      • In TMWSuite Order Entry and Fuel Dispatch Oil Field Order Entry:

        • 0 sets the earliest pickup time to the current time. For example, an entry of 0,0 sets the earliest pickup date/time to today and time to now (time the order was entered in the system).

        • hh:mm sets the absolute time, in 24-hour format. For example, an entry of 1,13:30 sets the earliest pickup date/time to tomorrow at 1:30 p.m.

        • mmm sets the time offset, in minutes, relative to the current time. For example, and entry of 0,60 sets the earliest pickup date/time to today, one hour from the current time.

      • In TMW Operations Order Maintenance and Trip Folder, hh:mm sets the absolute time, in 24-hour format. For example, an entry of 1,06:00 sets the earliest pickup to tomorrow at 6:00 a.m.

        Note: TMW Operations does not support the now option (0,0) or the minute offset option (0,60). If you use these, TMW Operations displays 01/01/01 00:00 for the date/time.

Additional Notes

You can use these settings to change other default date/time settings.

  • [Order]InitLatPckUpDt

  • [Order]InitEarlyDrpDt
    Note: This setting is supported only for Fuel Dispatch.

  • [Order]InitLatDrpDt
    Note: This setting is supported only for Fuel Dispatch.

[Order]InitLatDrpDt

Applies to

Fuel Dispatch V16.10 and later

Description

Use this setting to specify the default latest drop date and time when you create a new order in the Oil Field Order Entry window. Your entry must consists of two parameters (date and time). You separate them with a comma. Do not enter spaces before or after the comma.

Options

  • Blank, that is, no entry
    Apply the system default of 12/31/49, 23:59.

  • User-defined parameters
    Your entry must consists of two parameters:

    • Date
      Sets the latest drop date, relative to the current date

      For example, 0 equals today, 1 equals tomorrow, 2 equals two days in the future, etc.

    • Time

      • 0 sets the earliest drop time to the current time. For example, an entry of 0,0 sets the earliest drop date/time to today and time to now (time the order was entered in the system).

      • hh:mm sets the absolute time, in 24-hour format. For example, an entry of 1,13:30 sets the latest drop date/time to tomorrow at 1:30 p.m.

      • mmm sets the time offset, in minutes, relative to the current time. For example, and entry of 0,60 sets the latest drop date/time to today, one hour from the current time.

Additional Notes

  1. TMWSuite and TMW Operations do not support this setting.

  2. You can use these settings to change other default date/time settings.

    • [Order]InitEarlyPckUpDt

    • [Order]InitLatPckUpDt

    • [Order]InitEarlyDrpDt

[Order]InitLatPckupDt

Applies to

TMWSuite, TMW Operations, Fuel Dispatch V16.10 and later

Description

Use this setting to specify the default latest pickup date and time when you create a new order. Your entry must consists of two parameters (date and time). You separate them with a comma. Do not enter spaces before or after the comma.

Options

  • Blank, that is, no entry
    Apply the system default of 12/31/49, 23:59.

  • User-defined parameters
    Your entry must consists of two parameters:

    • Date
      Sets the latest pickup date, relative to the current date

      For example, 0 equals today, 1 equals tomorrow, 2 equals two days in the future, etc.

    • Time
      Sets the latest pickup time on the specified date

      • In TMWSuite Order Entry and Fuel Dispatch Oil Field Order Entry:

        • 0 sets the latest pickup time to the current time. For example, an entry of 0,0 sets the latest pickup date/time to today and time to now (time the order was entered in the system).

        • hh:mm sets the absolute time, in 24-hour format. For example, an entry of 1,13:30 sets the latest pickup date/time to tomorrow at 1:30 p.m.

        • mmm sets the time offset, in minutes, relative to the current time. For example, and entry of 0,60 sets the latest pickup date/time to today, one hour from the current time.

      • In TMW Operations Order Maintenance and Trip Folder:

        hh:mm sets the absolute time, in 24-hour format. For example, an entry of 1,06:00 sets the latest pickup to tomorrow at 6:00 a.m.

        Note: TMW Operations does not support the now option (0,0) or the minute offset option (0,60). If you use these, TMW Operations displays 01/01/01 00:00 for the date/time.

Additional Notes

You can use these settings to change other default date/time settings.

  • [Order]InitEarlyPckUpDt

  • [Order]InitEarlyDrpDt
    Note: This setting is supported only for Fuel Dispatch.

  • [Order]InitLatDrpDt
    Note: This setting is supported only for Fuel Dispatch.

[Order]InvoiceStatusEditLocks

Applies to

TMWSuite, Fuel Dispatch, TMW Operations

Description

This setting prevents users from making changes to orders that have a given invoice status. When an invoice status is specified in this setting, any order having that status cannot be modified in these applications:

  • TMWSuite Order Entry

  • TMW Operations Order Maintenance

Specify desired statuses by typing the abbreviations assigned to them in the InvoiceStatus label. Make your entry as a comma separated list with no spaces. For example: InvoiceStatusEditLocks=PRN,XFR.

Options

  • HLD,RTP,PRN,XFR,NTP,PRO (default)
    You cannot edit orders that have an invoice status of On Hold, Ready to Print, Printed, Transferred, NTP, or Inv or MB Printed.

    Note: Statuses not specified will have no effect on a user’s ability to change an order.

Additional Notes

This setting does not affect the Trip Folder. A setting with this same name exists in the [Dispatch] section for that purpose.

[Split] settings

[Split]AllowChangeTrailer

Applies to

TMWSuite: Prior to 2003, TMW Operations

Description

This setting determines whether the HCT-Hook Change Trailer and IHCT-Billable Hook Change Trailer events will be offered as options when you split a trip using the Split Trip: Park and Hook command in the Dispatch or Edit menus. The default for the Hook Event field is HLT-Hook Loaded Trailer.

Options

  • No (default)
    Only the HLT-Hook Loaded Trailer or IHLT-Billable Hook Loaded Trailer events will be offered in the Park and Hook window.

  • Yes
    In the Park and Hook window, allow the user to select one of the following:

    • HLT - Hook Loaded Trailer

    • IHLT - Billable Hook Loaded Trailer

    • HCT - Hook Change Trailer

    • IHCT - Billable Hook Change Trailer

Additional Notes

This setting does not work in Fuel Dispatch.

[Split]EstimateDates

Applies to

TMWSuite

Description

This setting determines whether the system will estimate dates for Park and Hooks.

Options

  • N (default)
    Do not estimate dates for Park and Hook events.

  • Y
    Estimate dates for Park and Hook events.

[Split]TrailerRequiredToSplit

Applies to

TMWSuite, TMW Operations, Fuel Dispatch

Description

Use this setting to require that a primary trailer is assigned to a trip before allowing the trip to be split.

Note: Trips may also have a secondary, or pup, trailer assigned.

Options

  • YES (default)
    Require a trailer assignment to split a trip.

  • NO
    Do not require a trailer to split a trip.

    Note: This option is required if you are splitting a trip assigned to a straight truck.

[StopOrderEntry] settings

[StopOrderEntry]AutoPopulateCommodity

Applies to

Fuel Dispatch

Description

Use this setting to record the shipper’s default commodity on Oil Field Order Entry orders.

You can also use the setting to replace the existing commodity when the shipper is changed on the order.

An entry for this setting consists of two characters. These characters are independent of one another.

Options

Character 1 determines whether the system automatically adds the commodity.

  • N (default)
    The system does not automatically insert the shipper’s default commodity.

  • Y
    The system automatically inserts the shipper’s default commodity.

    Notes:

    1. The system adds the commodity to the Freight Detail grid automatically.

    2. If no default commodity is recorded for the shipper, the freight detail’s Commodity field is set to UNKNOWN.

    3. You can manually change the default commodity as needed.

    4. If you change the shipper back to UNKNOWN, the commodity resets to UNKNOWN.

Character 2 determines whether the system replaces the existing commodity when the shipper is changed on the order. To use this, you must have Character 1 set to Y.

  • 1
    Automatically replace the existing commodity with the new shipper’s default commodity.

    Note: If the new shipper does not have a default commodity in its company profile, the commodity for the original shipper is retained.

  • 2
    Keep the existing commodity; do not replace it with the new shipper’s default commodity.

  • 3
    Display a prompt that allows the user to determine whether the system replaces the existing commodity with the new shipper’s default commodity.

[StopOrderEntry]AutoPopulateConsignee

Applies to

Fuel Dispatch

Description

Use this setting to record the shipper’s default consignee on Oil Field Order Entry orders.

You can also use the setting to determine whether the system replaces the existing consignee when the shipper is changed on the order.

An entry for this setting consists of two characters. These characters are independent of one another.

Options

Character 1 determines whether the system automatically adds the consignee.

  • N (default)
    The system does not automatically insert the shipper’s default consignee.

  • Y
    The system automatically inserts the shipper’s default consignee.

    Notes:

    1. The system adds the consignee to the Stop Detail grid automatically.

    2. If no default consignee is recorded for the shipper, the drop’s Company ID field is set to UNKNOWN.

    3. You can manually change the default consignee as needed.

    4. If you change the shipper back to UNKNOWN, the consignee resets to UNKNOWN.

Character 2 determines whether the system replaces the existing consignee when the shipper is changed on the order. To use this, you must have Character 1 set to Y.

  • 1
    Automatically replace the existing consignee with the new shipper’s default consignee.

    Note: If the new shipper does not have a default consignee in its company profile, the consignee for the original shipper is retained.

  • 2
    Keep the existing consignee; do not replace it with the new shipper’s default consignee.

  • 3
    Display a prompt that allows the user to determine whether the system replaces the existing consignee with the new shipper’s default consignee.

[StopOrderEntry]BillToParentCmpRestriction

Applies to

Fuel Dispatch

Description

This setting filters shipper and consignee companies available in the Oil Field Order Entry window Stops grid. The CompanyID field drop-down lists show only those having the same parent company as the Bill To.

Options

  • Y (default)
    Apply filtering to the shipper and consignee companies available in the Stops grid; CompanyID drop-down lists have the same parent company as the Bill To.

    Note: To use this option, you must have [StopOrderEntry]ShipperParentCmpRestriction=N in your TTS50.

  • N
    Do not apply filtering to the shipper and consignee companies available in the Stops grid.

Additional Notes

This setting does not apply to Call On Demand Order Entry.

[StopOrderEntry]DisableOrderByFilterOnOrderBy

Applies to

Fuel Dispatch 14.10

Description

In Oil Field Order Entry, the Order By company on an order must be an Account Of company. Use this setting to turn off this requirement.

Options

  • N (default)
    Show only Account Of companies in the Order By field.

  • Y
    Show all active companies.

Additional Notes

This setting does not apply to Call On Demand Order Entry.

[StopOrderEntry]IsProducingEnablesTanks

Applies to

Fuel Dispatch, Inventory Service

Description

Use this setting to have Oil Field Order Entry limit tank availability to tanks flagged as Is Producing in their profiles. Tanks are flagged as such when the Is Producing check box is selected on the Tanks tab.

Note: Tank profiles are defined using the Tanks tab. It is available in these windows:

  • Fuel Dispatch Company Relations Profile

  • Inventory Services Company Tank Setup

Options

  • N (default)
    All tanks listed for a company in its company relations profile will appear in Oil Field Order Entry.

  • Y
    Only tanks flagged as Is Producing are only listed in Oil Field Order Entry.

[StopOrderEntry]OFOECompanyIdStopDropDownCount

Applies to

Fuel Dispatch

Description

Use this setting to specify the maximum number of IDs that appear in the Company ID and Company_AltID fields' drop-down lists. This setting applies only to the fields in the Oil Field Order Entry window’s Stops grid. The UNKNOWN option will always appear. It is not included in the number you specify.

Options

  • 10 (default)
    The CompanyID and Company_AltID drop-down lists can display up to ten IDs, plus UNKNOWN.

  • A user-specified whole number other than 0 (zero)

    The CompanyID and Company_AltID drop-down lists can display up to the specified number of IDs, plus UNKNOWN.

Additional Notes

  1. The instant best match feature displays IDs according to the available IDs matching your entry. The system may display fewer IDs than the setting specifies.

  2. Setting this number to too high a value will lower system performance.

  3. This setting does not apply to the Fuel Dispatch Call On Demand Order Entry window.

[StopOrderEntry]OFOETankMode

Applies to

Fuel Dispatch 16.20

Description

You record a lease’s tank on the Tanks tab in the Company Relations Profile window. By default, only ten tanks are allowed.

By default, you must enter run ticket details on the Oil Field Readings tab in the Order Field Order Entry window manually.

This setting:

  • Allows you to record more than ten tanks for a lease

  • Tells the system to create run ticket details automatically, when you add freight details to oil field orders.

Options

  • Legacy (default)
    A lease can have up to ten tanks. You add run ticket details manually.

  • Crude
    A lease can have more than ten tanks. The system adds run ticket details for each freight detail automatically when you create an oil field order.

Additional Notes

  1. To view run ticket information in the Order Field Order Entry window, you must have [StopOrderEntry]ShowOilFieldReadings=Y in your TTS50.

  2. To add tanks to leases, you must have [FuelDispatch]TankSetupCompanyTypeFilter set to S, CS, or SC in your TTS50.

  3. Inventory Services does not support this setting.

[StopOrderEntry]SetBillToFromShipper

Applies to

Fuel Dispatch V.13.20.62.0

Description

Use this setting to record the shipper’s default Bill To on Oil Field Order Entry orders.

You can also use this setting to determine whether the system replaces the existing Bill To when the shipper is changed on the order.

An entry for this setting consists of two characters. These characters are independent of one another.

Options

Character 1 determines whether the system automatically adds the Bill To.

  • N (default)
    The system does not automatically insert the shipper’s default Bill To.

  • Y
    The system automatically inserts the shipper’s default Bill To.

    Note: To use this option, you must have the [StopOrderEntry]BillToParentCmpRestriction=N setting in your TTS50.

Character 2 determines whether the system replaces the existing Bill To when the shipper is changed on the order. To use this, you must have Character 1 set to Y.

  • 1
    Automatically replace the existing Bill To with the new shipper’s default Bill To.

    Notes:

    1. If you change the shipper and a Bill To is specified in its company profile, the Bill To on the order does not change. The Bill To from the previous shipper remains on the order.

    2. If the new shipper does not have a default Bill To in its company profile, the Bill To on the order changes to UNKNOWN.

  • 2
    Keep the existing Bill To; do not replace it with the new shipper’s default Bill To.

  • 3
    Display a prompt that allows the user to determine whether the system replaces the existing commodity with the new shipper’s default Bill To.

[StopOrderEntry]ShipperParentCmpRestriction

Applies to

Fuel Dispatch 16.10

Description

Use this setting to filter shipper companies in Oil Field Order Entry. Shippers are restricted to those having the Order By company as their parent.

Options

  • N (default)
    Do not filter shipper companies based on the Order By company.

  • Y
    Filter shipper companies based on the Order By company.

    Note: To use this option, you must have the [StopOrderEntry]BillToParentCmpRestriction=N in your TTS50.

Additional Notes

This setting does not apply to Call On Demand Order Entry.

[StopOrderEntry]ShowOilFieldReadings

Applies to

Fuel Dispatch 13.11

Description

This setting determines whether the Oil Field Order Entry tab appears in the Oil Field Order Entry window. The tab shows readings data submitted by the driver assigned to the order. The data is editable.

Note: The Oil Field Order Entry window is available when you have [FuelDispatch]ShowOilFieldOrderEntry=Y.

Options

  • N (default)
    The Oil Field Order Entry tab is hidden.

  • Y
    The Oil Field Order Entry tab is shown.

[TruETA] settings

[TruETA]ApiKey

Applies to

Fuel Dispatch, TMW Operations

Description

Customer-specific key generated by Trimble Maps.

Options

User-specific value

Additional Notes

  1. To obtain this key, contact your Customer Support representative.

  2. This key is required to use TruETA.

[TruETA]BrokeredLoadHosSolution

Applies to

Fuel Dispatch, TMW Operations

Description

TruETA generates Hours Of Service (HOS) rest stop solutions for carrier-based loads.

Options

  • N (default)
    TruETA does not generate HOS rest stop solutions for carrier trips.

  • Y
    TruETA generates HOS rest stop solutions for carrier trips.

[TruETA]ETAAgentUpdatePositions

Applies to

Fuel Dispatch, TMW Operations

Description

Determines if the TruETA Agent sends position updates on processed trips based on check calls to the Trimble Maps TruETA service.

Options

  • N (default)
    The TruETA Agent does not pass position updates.

  • Y
    The TruETA Agent passes position updates based on check calls since the last time the TruETA Agent ran.

[TruETA]ETAAgentUpdateTripStatus

Applies to

Fuel Dispatch, TMW Operations

Description

Determines if The TruETA Agent sends trip statuses to the Trimble Maps TruETA service.

Options

  • N (default)
    Trip statuses are not sent to the Trimble Maps TruETA service.

  • Y
    Trip statuses are sent to the Trimble Maps TruETA service.

Notes

If you plan to use the Out of Corridor or the Out of Route features, you must set this status to Y.

This setting must be set to Y for the TruETA feature to function correctly.

[TruETA]ETAStopsCalc

Applies to

Fuel Dispatch, TMW Operations

Description

Enables or disables the TruETA Agent feature for trips.

Note: This feature is not related to the TruETA feature.

Options

  • N (default)
    Trips are not processed through the TruETA Agent.

  • Y
    Trips are processed through the TruETA Agent.

Note

The TruETA Agent feature will not process any trips without enabling this setting.

[TruETA]FuelDwellTimeMinutes

Applies to

Fuel Dispatch, TMW Operations

Description

Specifies the amount of time (in minutes) allocated for fuel stops.

Options

  • 30 (default)

    TruETA allocates 30 minutes for fuel stops.

  • User-specified value
    TruETA allocates this user-specified value for fuel stops

Notes

To use this setting, you must have the ExpertFuel module installed. To obtain this module, contact your Sales representative or your Customer Service representative.

[TruETA]MaxAlternativeRestStops

Applies to

Fuel Dispatch, TMW Operations

Description

Number of alternative rest stop locations that are presented to the dispatcher for all trips.

Options

  • 3 (default)
    TruETA identifies three alternative rest stop locations.

  • User-specified value
    TruETA identifies this user-specified number of alternative rest stop locations.

Notes

To use this setting, you must set [TruETA]BrokeredLoadHosSolution = Y.

[TruETA]OOCMiles

Applies to

Fuel Dispatch, TMW Operations

Description

Number of Out Of Corridor (OOC) miles that the TruETA Agent sends to the Trimble Maps TruETA service when planning or modifying trips.

Options

  • 1 (default)
    Adds one (1) mile to the OOC miles sent.

  • User-specified value
    Adds the user-specified number of miles to the OOC miles sent.

    Note: This value cannot be a decimal number (such as 2.3).

[TruETA]OORMiles

Applies to

Fuel Dispatch, TMW Operations

Description

Number of Out Of Route (OOR) miles that the TruETA Agent sends to the Trimble Maps TruETA service when planning or modifying trips.

Options

  • 1 (default)
    Adds one (1) mile to the OOR miles sent.

  • User-specified value
    Adds the user-specified number of miles to the OOR miles sent.

    Note: This value cannot be a decimal number (such as 2.3).

[TruETA]ProcessOnceAndExit

Applies to

Fuel Dispatch, TMW Operations

Description

Determines how the TruETA Agent runs and how often it processes trips.

Default processing method

The TruETA Agent runs non-stop and processes trips every XX number of minutes. The number of minutes depends on the value set in [MobileComm]ETACalcFrequency.

Alternative processing method

The TruETA Agent runs and processes trips as soon as the Agent window is opened. After the Agent runs and processes the trips, the window is closed. This setting was designed to run with Windows Task Scheduler.

Options

  • F (default)

    The TruETA Agent uses the default processing method.

  • T
    The TruETA Agent uses the alternative processing method.

[TruETA]TruETAMileage

Applies to

Fuel Dispatch, TMW Operations

Description

This setting determines the mileage calculation method used by TruETA Agent.

Options

  • Standard (default)

    The TruETA Agent uses a local installation of Trimble Maps PC*Miler to estimate and calculate mileage.

    Note: This method is faster than the Web method. Trimble Transportation recommends using this setting.

  • Web

    The TruETA Agent uses the TruETA web service to estimate and calculate mileage.

    Note: With this method, you do not need a local installation of Trimble Maps PC*Miler. However, this method runs slower than the Standard method.

[TruETA]TruETAWebServiceAddress

Applies to

Fuel Dispatch, TMW Operations

Description

URL address for the TruETA endpoint.

Options

Note

This setting is required to use the TruETA Agent.